probably broke my n9
 

i have a issue i am not able to flash n9 firmware on my nokia heres the log output any help wuld be appriciated
(note i did install the 001 vershion earlier is there any way i can overcome this)
Microsoft Windows [Version 10.0.14393]
(c)TEAMOS [?X?S?Y & tomeCar]

C:\Windows\system32>cd C:\Program Files\Nokia\Flasher

C:\Program Files\Nokia\Flasher>flasher -f -F asian.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 20 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1338190008)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

please help me breathe life into my n9 one more time(also what the hell is the security faliure thingy)

Re: probably broke my n9
 

also note my original firmware was pr003 witch still gives the same warning

Re: probably broke my n9
 

I'm only a novice, but I see "Downgrade Disallowed" at the end of the log. That might be the only problem.
You can only flash the same firmware or upgrade (incrementing numbers; 001, 002......), you may never be able to downgrade. Chinese firmware is generally avoided since it imposes added restrictions to future flashing.

Edit: if your going from 003 to 005 and get errors, you may need to use '003 firmware' to flash cmt (see recovering from flash errors).

Re: probably broke my n9
 

still can i go from 001 to 005? as i had that at the time of flashing (and yes i did do i downgrade once from 003 to 001 and suprisingly it did work then and now it wont)

Re: probably broke my n9
 

guess ill try the 001 again

Re: probably broke my n9
 

No, you cannot downgrade from 003 to 001 with normal tools.

Re: probably broke my n9
 

are there other tools that can flash a n9?

Re: probably broke my n9
 

also any way to cold flash the n9?

Re: probably broke my n9
 

ok so i figured somestuff out is it possible to upgrade from 006 to 009 and then from 009 to 001?(while staying on pr1.3 as i cant appear to find any other firmware variant)

Re: probably broke my n9
 

Two possible ways:

https://talk.maemo.org/showpost.php?...6&postcount=18
https://talk.maemo.org/showpost.php?...0&postcount=19

https://talk.maemo.org/showpost.php?...0&postcount=33