maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N810 (https://talk.maemo.org/forumdisplay.php?f=28)
-   -   Car Mount Mod (https://talk.maemo.org/showthread.php?t=12092)

munky261 2007-11-22 04:05

Car Mount Mod
 
1 Attachment(s)
Hey all , just wanted to show a little mod i made to the car mount... trimmed the bottom corners of the bracket w/ my dremel so the buttons , especially the menu button is easier to press. :)

munky261 2007-11-22 04:49

Re: Car Mount Mod
 
p.s. , i alsofilled in the hollow part of the clip on top with epoxy putty and ground down the fron of the clip so it didnt push against the screen when you slide it up in the mount... just didnt like how that pushed on it.

cman74 2007-11-22 12:36

Re: Car Mount Mod
 
Nice work. How does the base mount work? Does it just have suction cups to connect to your windshield?

nilchak 2007-11-22 17:27

Re: Car Mount Mod
 
There is no suction mousnt with the kit to connect at all.

This is bad - I took the kit to the car, and there is no way to mount on the car at all. IThe included mount is only to mount the N810.

Seems lkike we have to buy the Vent mount which has holes to line up rtight with the Nokia Mount. So an extra mount is needed to be bought seperately.

adammazza 2007-11-22 17:58

Re: Car Mount Mod
 
I agree, it looks like if you wanted to use the car mount as is, it contains 4 long screws :(. Anyone have suggestions on car mounts to buy? I've seen a few on ebay which look like they may work. I don't think I need to have the keyboard out when the unit is used as a GPS.

Adam

spacey 2007-11-22 18:22

Re: Car Mount Mod
 
I'm planning on getting a setup from these guys:

http://www.proclipusa.com/choosecoun...secountry.aspx

munky261 2007-11-22 20:01

Re: Car Mount Mod
 
well , sometimes you need need the keyboard out to hit the drop down menu button. i just screwed mine directly to my dash. i looked at the possibility of plastic welding the holder to a flex neck mount but it wasnt solid enough for me , bounced too much. i like the stability of the included mount.

cman74 2007-11-22 20:51

Re: Car Mount Mod
 
Quote:

Originally Posted by spacey (Post 98761)
I'm planning on getting a setup from these guys:

http://www.proclipusa.com/choosecoun...secountry.aspx

Do they have a mount specifically for the N810 yet? I see one for the N800.

rcadden 2007-11-23 04:21

Re: Car Mount Mod
 
I'm actually really looking forward to the mount being in the box, as I have a custom-built panel on my dash that previously mounted my N95 and iPod. The iPod died, so there's been an empty spot, and the N810/N800 will make a killer replacement.

smammon 2007-11-27 02:36

Re: Car Mount Mod
 
Due to my motorcycle and gadget addictions - I've got chunks of ram-mount.com mounts around. I have one of the suction cup bases - just so happens that 2 of the Nokia screw holes in the stock mount that come with the N810 line up with the holes in the suction cup mount.

In the photo below - remove the ball portion. The screw holes line up there. I used the ball in another project and had just the suction cup left so it works perfectly for me. The part is probably $15 or so plus shipping.

http://www.ram-mount.com/ramwebcompthumb/ramb2241.jpg

DR.Tek 2007-12-16 07:43

Re: Car Mount Mod
 
Quote:

Originally Posted by adammazza (Post 98757)
I agree, it looks like if you wanted to use the car mount as is, it contains 4 long screws :(. Anyone have suggestions on car mounts to buy? I've seen a few on ebay which look like they may work. I don't think I need to have the keyboard out when the unit is used as a GPS.

Adam

I got mine off of eBay. Works fine. Doesn't center up like the mount that comes with it, but it is adjustable enough to keep it snug. Here's a link to the one I bought:
http://cgi.ebay.com/Car-Mount-Holder...sid=p1638.m118

cycroft 2007-12-23 14:10

Re: Car Mount Mod
 
How do you slide the N810 into the car mount?


All times are GMT. The time now is 05:14.

vBulletin® Version 3.8.8