PR1.1 Feedback?
 

those who updated their device, post your feedback here i want hear some good news lol im still waiting for mine :(

Re: PR1.1 Feedback?
 

The update basically worked. But now something with the nameserver is broken. My resolv.conf is empty and i can't resolve names although i do have basic ip connectivity. Need to investigate this ...

I'll keep documenting this here, just in case someone runs into the same issues. I have tracked this down to the point that udhcpc creates a resolv.conf in /tmp/resolv.conf.wlan0 whereas dnsmasq expects this file to be in /var/run. Copying the file manually fixes the problem.

Does anyone here know how the file is to be put into /var/run ? The first few lines of the file responsible for this look like this in my machine:

Is this file broken on my machine? Should this really read /tmp in that RESOLV_CONF line? Can someone confirm this?

Edit: Further down this thread you'll find the solution. Here's the short version:

The problem is due to the fact that i some time ago had vpnc installed. The vpnc installation modified the file /etc/udhcpc/libicd_network_ipv4.script (and left it in that state after i uninstalled vpnc). The update wants to update this file, but since it recognized it as not being the original version doesn't touch it. Instead the new version isbeing saved by the update under /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist

So the solution is simple: get root (e.g. sudo gainroot) and do a "mv /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist /etc/udhcpc/libicd_network_ipv4.script" to replace the old modified version with the one the update tried to install. After that everything is fine again.

This also means that you probably shouldn't install vpnc on updated machines before this has been sorted out.

Re: PR1.1 Feedback?
 

First problem i noticed is that my calendar is somewhat broken.

1. The Calendar Widget only displays january not the enties from feb. (could be related to 2.)
2. I have a entry on feb the first and in the calendar monthly view it will be shown with a marker if i click on the day the entry is missing.

i tried exporting and importing the calendar again but the buggy feb the first is still there.

This does not happen with the old firmware.

Re: PR1.1 Feedback?
 

does this have Portrait mode yet?

Re: PR1.1 Feedback?
 

No portrait mode yet.

Re: PR1.1 Feedback?
 

sound is louder, browser has portrait mode support




jahaugum

Today , 04:46 PM
Posts: 6 | Thanked: 14 times | Joined on Oct 2009 @ Trondheim, Norway

Tutorial: Make sure you have PR1.1 firmware. Press ctrl-shift-o . Then close your keyboard. Rotate your device into portrait, and then the browser should rotate into portrait mode too.

Re: PR1.1 Feedback?
 

The widget only shows next 2 weeks. It was a bug that displayed some events far in the future before.

Re: PR1.1 Feedback?
 

speakers are definitely louder and clearer>> :)

Re: PR1.1 Feedback?
 

Still no FULL UI portrait mode. Still holding my breath lol

Re: PR1.1 Feedback?
 

Ovi Maps properly tracks your position now when moving :-)

In previous version, you had to have routing active for the tracking to work.

Re: PR1.1 Feedback?
 

full portrait???? not in this update............

Re: PR1.1 Feedback?
 

I call shenanigans! You can't lol while holding breath!

Re: PR1.1 Feedback?
 

I can`t proceed: I get this: Not enough memory on end of target??
hmm

Re: PR1.1 Feedback?
 

I think so. That file is used by dnsmasq. /etc/resolv.conf should just point to 127.0.0.1

Re: PR1.1 Feedback?
 

Update via SSU is not working (says I have to use NSU, there is 63MB free in /).
Update via NSU is not working either (says there is no update available).

Re: PR1.1 Feedback?
 

Can someone check if USB networking works as before the update?
I have this problem:
The device does not respond to pings anymore, neither on the IP associated to the USB interface (192.168.2.15) nor to localhost (127.0.0.1).
What works are pings to the PC (192.168.2.14) from the device.

Re: PR1.1 Feedback?
 

If you are in bright light, while not great, the mirror app is at least usable now.

Re: PR1.1 Feedback?
 

MfE 2003 is now working and noticed new light blue led blinking if display is off, nice. Feature or am i missing something?

Also my update didnt go well. Had to flash device with older firmware and then do the update process again without any other software installed.

Re: PR1.1 Feedback?
 

the sound when u bring up virtual keyboard has changed, i prefer new sound

Re: PR1.1 Feedback?
 

Re: PR1.1 Feedback?
 

it means you have too much stuff in rootfs. Try some of these:
http://talk.maemo.org/showpost.php?p=468063&postcount=1
if that fails, try to remove some programs. Especially those from dubious sources (extras-devel, third party repositories, etc...)

Re: PR1.1 Feedback?
 

i think it has been improved a little.. not much

Re: PR1.1 Feedback?
 

MCE.ini was updated so probably there has been at least minor tweaks to led patterns.

Re: PR1.1 Feedback?
 

still no implementation of front camera

Re: PR1.1 Feedback?
 

Have you installed vpnc_0.5.8-0m5_armel.deb from Maemo Extras Devel? That package might cause the issue.

Re: PR1.1 Feedback?
 

wasn't even expected...

Re: PR1.1 Feedback?
 

Have just updated mine.
What I have noticed is that when you use it as a "modem", to connect your computer to the internet, it disconnects every 5-10 minutes and you need to reconnect.

Havent found any settings to change. Was more "stable" before the upgrade.

Re: PR1.1 Feedback?
 

I did through Nokia Software Update via USB no problem with memory. Installing now the backup I made.

Re: PR1.1 Feedback?
 

NSU clears out everything from rootfs, so no there are no memory problems with that method :)

Re: PR1.1 Feedback?
 

full changelog can be found here. http://www.maemo-freak.com/index.php...f-improvements

Re: PR1.1 Feedback?
 

/etc/resolv.conf doesn't even need to contain anything. My question was: This script writes the file to /tmp while dnsmasq expects it under /var/run. The question: Is it correct for the script to place it in /tmp and if yes, what mechanism moves it to /var/run as this part seems to fail.

Re: PR1.1 Feedback?
 

Noticed that when using the front camera with the mirror app that the band that used to appear 3/4 of the screen to the right side has disappeared. The quality is still rubbish. :)

Re: PR1.1 Feedback?
 

I had that installed previously and yes, i noticed that the vpnc package added something to the script. This may have prevented the script from being updated.

Would someone who has updated his machine be so kind to put his
/etc/udhcpc/libicd_network_ipv4.script somewhere so i can compare them?

Re: PR1.1 Feedback?
 

The value of /proc/sys/net/ipv4/icmp_echo_ignore_all has been changed to 1, so this is the reason why the device does not respond to pings anymore.

Re: PR1.1 Feedback?
 

Or more officially, here:
http://wiki.maemo.org/Maemo_5/PR1.1

Re: PR1.1 Feedback?
 

Mine says:

Hope this helps,

Chris.

Re: PR1.1 Feedback?
 

Hmm. Not on my device. Is there a reference in the changelog for that?

Regards,

Chris.

Re: PR1.1 Feedback?
 

Is it just me, or has WiFi power management been put into a very aggressive mode now, powering down after milliseconds and leading to packets being dropped and the device essentially becoming unresponsive (network-wise, not the entire device!) after a few seconds, unless network traffic is being kept up at a rather high rate?

Regards,
Chris.

Re: PR1.1 Feedback?
 

wifi stopped working entirely for me it seems.

Re: PR1.1 Feedback?
 

I did a backup and the firmware update, using the PC, Restored the backup. I had to 'change names'trhee times (name being: 'the same', no clue). All seems to work fine for now.
EDIT Browser is FAST!! History in Browser is smooth. :)

But...
I don't see Nokia Messaging anymore in Modest, My other account being still there! Do I just have to add this again?