maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   Boot Message: "System Malfunction Shutdown in 10s"! What is this? (https://talk.maemo.org/showthread.php?t=43067)

CrckMc 2010-02-02 11:15

Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Hey everyone,

i rebooted my N900 5 minutes ago and on the NOKIA logo screen there was written "System Malfunction Shutdown in 10s" in the green font like when you have R&D enabled. The n900 shut down during the boot as i turned it back on again everything worked fine.

Do i have to worry about my phone or has anyone else experienced this?

Thanks

CrckMc

Rob1n 2010-02-02 11:18

Re: System Malfunction Shutdown it 10s! WTF?
 
I've not seen that, no. I wouldn't worry about it unless it reoccurs though.

lma 2010-02-02 12:11

Re: System Malfunction Shutdown it 10s! WTF?
 
That seems to come from /sbin/preinit if /sbin/getbootstate returns "MALF" (well, any unexpected value really but that's the only one I can see with strings(1) that isn't handled). Beyond that, without source, your guess is as good as mine...

Bec 2010-02-02 13:19

Re: System Malfunction Shutdown it 10s! WTF?
 
Just had this today.
Played a lot in extras-devel, played with the hosts file in \etc.

It seemed to be connected with the charging process...

Everyhting works fine anyway :)

Schturman 2010-02-02 16:39

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
I got this one time after 4-5 reboots...

jamie721 2010-03-03 12:44

Re: Boot Message: "System Malfunction Shutdown in 10s"! And boot loop fix.
 
I had this problem the other day. I was getting angry with the fact i could no longer download any appplications due to having a full rootfs so i decided i was gonna try and clean it up manualy. i gained root *Woops* then did rm -f /usr/lib/* . seemed to have worked ok then i tryed to boot some applications they started to load but then disapeared. i then paniced thought opps why did i have to do that and restarted at this point i was faced with the dreaded
System Malfunction!
device shutdown in 10s!.


it would then reboot repeatedly until battary ran out.


SOLUTION!!!!!-!!!WOOT WOOT !!!

1.Find somebody with either the same phone n900 or the nokia x5800 or go buy an external charger to charge your battery for your phone.

i didnt belive these next 2 statements untill i tryed it.

Your n900 is unable to charge your battery in this state!!

You are unable to flash your phone with less then over half a battery!!!


2. Once you have charged your battery remove it and sit it on your side.

Prepare your computer for a re-flashing the n900.

3.You must install flasher 3.5. There are tutorials for installing this to windows linux and mac on this site.
3.1.Download and install the latest version of Flasher e.g.
maemo_flasher-3.5_2.5.2.2.exe


4.Download the firmware for your n900 save this in a memorable place.

Connecting your phone to computer.

5.With the battery still removed hook your computer up to the n900 using the usb data cable.

Running flasher "haha" 3.5

6. Run the flashing application on computer. Like i said befor i will post the exact details when i get home

This application will stop and say its waiting to find the device that you want to flash.

Back to the phone
7.now with your phone all ready plugged into the computer open the keyboard and hold the "u" button and insert the battery while holding the "u" button. keep holding the u button untill you can see a very faint usb sign in the top right of the screen. This will put the phone into flashing mode aka R&D mode.

Warning you can not enter R&D mode with little battery must be full or nearly full.

The computer should then recognize your n900 and start to do stuff wait for this to finish. on my computer it only took 1 minuet 30 seconds ruffley. but be patiant dont rush it dont stop half way through dont unplugg make sure it has completly stoped before unplugging.

reboot the n900 walla :p

You may find that your sim card is no longer recognised :mad: do not panic this is just because you need to update your n900 :D. Do this by either connecting to wireless lan at your home and using the app manager update accross the internet or plugging the phone into the computer and using the nokia suite to update it over the internet. The latter i have not tested.

i hope this will help every one and could maybe become a basis for a flashing tutorial on this site. as i had to find all this infprmation all over the place.

di1in 2010-03-03 12:49

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
i guess you could create a wiki?

jamie721 2010-03-03 15:19

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by di1in (Post 553823)
i guess you could create a wiki?

could u possible point me in the direction of were i should host it and were i can start it. i keep hereing every one talking about doing wikis but i dont no were to find them?

sjgadsby 2010-03-03 15:27

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by jamie721 (Post 554079)
could u possible point me in the direction of were i should host it and were i can start it. i keep hereing every one talking about doing wikis but i dont no were to find them?

Please see wiki.maemo.org.

felbutss 2010-03-03 15:37

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
ummm already a wiki for this which has been there forever

http://wiki.maemo.org/Updating_the_t...#N900_.28XP.29



and if you have issues flashing. read how i overcame my problems.
http://talk.maemo.org/showthread.php?t=34983

jamie721 2010-03-03 17:04

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
i feel the wiki is to technical for an average joe user. you must spoon feed the average joe but not to much if you see what i mean. also alot of hints and tips from my experiance i think would help if they were added to that wiki. also my post isnt quite finished as i am still at work.

good work on the wiki tho just got to remember not every one is here from a technical background.

after reading more into that wiki i realise my tutorial isnt realy for just reflashing the n900 its more for fixing it from the system malfunction state. this isnt possible by just following the wiki as system malfunction stops you turning on and off your device and stops you charging your device this should be stated some were. i have also included areas that i got confused in while using that wiki. if you read my post u will notice there is information in there that isnt directly stated within the wiki.

sorry for the long post im not very good at english.

bchliu 2010-06-09 12:16

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
I just had this occur to me and I figure its because I ran the battery out this afternoon without a proper shutdown. This was like the previous shutdown's message. A full charge and a subsequent reboot fixed it issue for me.

Justdoit 2010-06-09 14:32

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
I had this problem last week.
When you're running out of battery-life don't(!) reboot your phone, or else it'll say that it's malfunctioning.

biggzy 2010-06-09 14:35

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Also had it twice in the past 2 wekks, it booted fine the 2nd time tho, maybe its coz iv modded my N900 to death?

system60 2010-06-16 17:03

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Have this happening right now after dropping it (and I was planning on ordering an otterbox this week)

When turning it on it just gets to the Nokia screen and vibrates in a loop till the shutdown message appears.

Unfortunately I'm away for work and don't have my usb to micro cable with me. Will have to wait till I'm back home friday night.

system60 2010-06-19 22:34

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
I'm trying to flash it right now (on an XP machine) and once I hit enter at the cmd prompt it says

Flasher v2.5.2 (Sep 24 2009)

RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM: %m

Wikiwide 2010-06-19 23:59

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
I had this green message one time. Restarted, and works normally (including subsequent restarts) from there on. The battery is always not less than 3/4. What could the reason be? I gain root sometimes, but I delete nothing, only install some packages and try out my strange theme for Hildon.

system60 2010-06-20 01:16

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by system60 (Post 722167)
I'm trying to flash it right now (on an XP machine) and once I hit enter at the cmd prompt it says

Flasher v2.5.2 (Sep 24 2009)

RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM: %m

I just tried running it w/o the phone connected just to see what it would do and I still get the same message.

system60 2010-06-20 18:47

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
turns out I was forgetting to put the extension at the end of the file :eek:

brusli13 2010-08-12 00:22

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Hi there!

I just instaled FCAMERA on my N900 it required me to restart. so i did.

unit kept restarting (just NOKIA welcome screen and restart),
until it showed MALFUNCTION!.... (as stated few posts before).

please help.
i have some important data on unit.
and I need it for work.

Thanks!

Maruzko 2010-08-12 01:47

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by brusli13 (Post 783651)
Hi there!

I just instaled FCAMERA on my N900 it required me to restart. so i did.

unit kept restarting (just NOKIA welcome screen and restart),
until it showed MALFUNCTION!.... (as stated few posts before).

please help.
i have some important data on unit.
and I need it for work.

Thanks!

Hi,
Only replying as no one else has yet, but you may have to reflash the firmware.
I'm no expert, and have not done this myself, but it should leave the data on the external memory, ie /MyDocs untouched.
Just dont reflash the eMMC as well, as this WILL wipe /MyDocs.
This is assuming thats the only place where your important data is.
Regs,
Maruzko

brusli13 2010-08-12 09:34

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
... i did kernel FLASHING and it took 5 sec of machine work and few minutes to read instructions and few minutes to download ~200MB.

boot normal. data OK.
thanks anyway.

MrJun04 2010-09-04 14:37

malfunction device shutting down..!
 
N900 malfunction device shutting down. wlan select connection no connection available.
help me...!

matts76 2010-09-04 14:43

Re: malfunction device shutting down..!
 
try posting a few more details, what have you done since things started going wrong? have you installed anything new? and what is the sequence of events that lead to this message?

aspetri 2010-10-13 18:57

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by system60 (Post 722850)
turns out I was forgetting to put the extension at the end of the file :eek:

hey i have this same broblem what extenson to the end u mean?

sam9953 2010-10-26 07:42

"malfunction device shutdown in 10s" cause?
 
i had this screen message "malfunction device shutdown in 10s" for the first time and i would like to know why does this happen and what does this show? will this effect mt device or not?

9000 2010-10-26 10:25

Re: "malfunction device shutdown in 10s" cause?
 
I saw this too on the boot screen after forced reboot during web-browsing when its overclocked to 950.

It doesnt seem to harm the device in any way nevertheless

sam9953 2010-10-26 11:43

Re: "malfunction device shutdown in 10s" cause?
 
Quote:

Originally Posted by 9000 (Post 851692)
I saw this too on the boot screen after forced reboot during web-browsing when its overclocked to 950.

It doesnt seem to harm the device in any way nevertheless

thats good to know

ste-phan 2010-10-26 11:53

Re: "malfunction device shutdown in 10s" cause?
 
This and other problems such as loop rebooting as far as the nokia splash screen I have experienced trying to remove al deep os rooted software such as power kernel, kismet, extra codecs, etc... as a matter of preparing for online upgrade to pr1.3.
Leaving out battery for a couple of minutes and flashing modus got accepted.
The ful pr1.3 rootfs image got rid of the mess.

ossipena 2010-10-26 11:54

Re: "malfunction device shutdown in 10s" cause?
 
have you overclocked?

plus zillion other questions for background information that might reveal something useful.

sam9953 2010-10-26 13:33

Re: "malfunction device shutdown in 10s" cause?
 
Quote:

Originally Posted by ossipena (Post 851798)
have you overclocked?

plus zillion other questions for background information that might reveal something useful.

no i did not overclock it but i had upgraded to pr 1.3 yesterday

viz 2010-11-03 14:22

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by aspetri (Post 840301)
hey i have this same broblem what extenson to the end u mean?

He means the ".bin" at the end of the file.
I have the same Problem as many else here, so I tried it step by step as mentioned with the result:

Code:

C:\Programme\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_C
OMBINED_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

SW version in image: RX-51_2009SE_20.2010.36-2_PR_MR0
Image 'kernel', size 1705 kB
        Version 2.6.28-20103103+0m5
Image 'rootfs', size 185728 kB
        Version RX-51_2009SE_20.2010.36-2_PR_MR0
Image 'cmt-2nd', size 81408 bytes
        Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
        Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
        Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.9+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.9+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.9+0m5
Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
  -F, --fiasco=ARG            Location of a FIASCO image
  -k, --kernel=ARG            Location of kernel image
  -n, --initfs=ARG            Location of initfs image
  -r, --rootfs=ARG            Location of root JFFS2 image
      --cmt-2nd=ARG          Location of CMT FIASCO 2nd image
      --cmt-algo=ARG          Location of CMT FIASCO algorithm image
      --cmt-mcusw=ARG        Location of CMT FIASCO MCUSW image
      --cmt-no-verify        Disable verification of CMT programming
  -x, --xloader=ARG          Location of X-Loader image
  -s, --secondary=ARG        Location of NOLO secondary bootloader image
  -2, --2nd=ARG              Location of NOLO cold flasher ("2nd") image
  -u, --unpack[=ARG]          Unpack a FIASCO image
  -f, --flash                Load and flash all supplied images
  -l, --load                  Only load all supplied images
  -b, --boot[=ARG]            Boot the kernel with optional cmdline
  -R, --reboot                Reboot the board (e.g. after flashing NOLO)
  -i, --read-device-id        Print out the device type
  -S, --serial-port=ARG      Serial port used for cold flashing or "usb"
  -I, --init-port            Only initialize the serial port
  -c, --cold-flash            "Cold flash" the device
  -h, --hw-revision=ARG      Specify product code and HW revision
      --enable-rd-mode        Enable R&D mode on the device
      --disable-rd-mode      Disable R&D mode on the device
      --set-rd-flags[=ARG]    Set R&D mode flags on the device
      --clear-rd-flags[=ARG]  Clear R&D mode flags on the device
      --query-rd-mode        Query the device R&D mode status and flags
      --set-hw-revision[=ARG] Set HW revision override on device
      --flash-only=ARG        Flash only certain components
  -U, --usb-device=ARG        Specify USB device to use (bus:device address)

I aint got a clue - somebody knows what to do?

viz 2010-11-04 07:46

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Ok I got it :)
:D
Code:

100% (185728 of 0 kB, avg. 185728 kB/s)
Finishing flashing... done
CMT flashed successfully

Well I charged the battery for more hours yesterday and connected the n900 with my PC. I started the CMD and run
Code:

flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R
No USB Device found, waiting......... now I inserted the battery into the mobile device, voila!

youngcalihottie 2010-11-08 10:19

Re: Boot Message: "System Malfunction Shutdown in 10s"! And boot loop fix.
 
Quote:

Originally Posted by jamie721 (Post 553816)
System Malfunction!
device shutdown in 10s!.


it would then reboot repeatedly until battary ran out.


SOLUTION!!!!!-!!!WOOT WOOT !!!

... ...

The computer should then recognize your n900 and start to do stuff wait for this to finish. on my computer it only took 1 minuet 30 seconds ruffley. but be patiant dont rush it dont stop half way through dont unplugg make sure it has completly stoped before unplugging.

reboot the n900 walla :p


aww man i was hoping u saved me. but i have the same problem you started with, but cant get the flasher to work. after doing 'u' and inserting the battery, the flasher is still waiting. but phone shows usb icon

James_Littler 2010-11-08 10:26

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
try it through an ubuntu live cd or usb stick, windows always does this.
you can try pulling the usb from the pc and trying a different port. I found one that always works, since then I've not had one error.

youngcalihottie 2010-11-08 20:49

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
im still new to linux. whats a live cd? and how would i use a usb stick for this? im installing ubuntu through wubi. will that help me? thanks again for the help

hassamahmed786 2010-11-22 19:14

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
please anyone help me....! my N900 shows NOKIA WITH VIBRATION and continues doing this until it says MALFUNCTION! DEVICE SHUTDOWN IN 10S please help me...! please please please..! i m in a great trouble and please give me some safe solution. please please.........................!

hassamahmed786 2010-11-22 19:26

Re: Boot Message: "System Malfunction Shutdown in 10s"! And boot loop fix.
 
Quote:

Originally Posted by jamie721 (Post 553816)
I had this problem the other day. I was getting angry with the fact i could no longer download any appplications due to having a full rootfs so i decided i was gonna try and clean it up manualy. i gained root *Woops* then did rm -f /usr/lib/* . seemed to have worked ok then i tryed to boot some applications they started to load but then disapeared. i then paniced thought opps why did i have to do that and restarted at this point i was faced with the dreaded
System Malfunction!
device shutdown in 10s!.


it would then reboot repeatedly until battary ran out.


SOLUTION!!!!!-!!!WOOT WOOT !!!

1.Find somebody with either the same phone n900 or the nokia x5800 or go buy an external charger to charge your battery for your phone.

i didnt belive these next 2 statements untill i tryed it.

Your n900 is unable to charge your battery in this state!!

You are unable to flash your phone with less then over half a battery!!!


2. Once you have charged your battery remove it and sit it on your side.

Prepare your computer for a re-flashing the n900.

3.You must install flasher 3.5. There are tutorials for installing this to windows linux and mac on this site.
3.1.Download and install the latest version of Flasher e.g.
maemo_flasher-3.5_2.5.2.2.exe


4.Download the firmware for your n900 save this in a memorable place.

Connecting your phone to computer.

5.With the battery still removed hook your computer up to the n900 using the usb data cable.

Running flasher "haha" 3.5

6. Run the flashing application on computer. Like i said befor i will post the exact details when i get home

This application will stop and say its waiting to find the device that you want to flash.

Back to the phone
7.now with your phone all ready plugged into the computer open the keyboard and hold the "u" button and insert the battery while holding the "u" button. keep holding the u button untill you can see a very faint usb sign in the top right of the screen. This will put the phone into flashing mode aka R&D mode.

Warning you can not enter R&D mode with little battery must be full or nearly full.

The computer should then recognize your n900 and start to do stuff wait for this to finish. on my computer it only took 1 minuet 30 seconds ruffley. but be patiant dont rush it dont stop half way through dont unplugg make sure it has completly stoped before unplugging.

reboot the n900 walla :p

You may find that your sim card is no longer recognised :mad: do not panic this is just because you need to update your n900 :D. Do this by either connecting to wireless lan at your home and using the app manager update accross the internet or plugging the phone into the computer and using the nokia suite to update it over the internet. The latter i have not tested.

i hope this will help every one and could maybe become a basis for a flashing tutorial on this site. as i had to find all this infprmation all over the place.

is this safe please help me.

XiliX 2010-11-22 21:02

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
Quote:

Originally Posted by youngcalihottie (Post 867376)
im still new to linux. whats a live cd?

A live cd is a bootable cd/dvd with an operating system on the disk.
That means you can simply stuff the dvd/cd into you computer and boot Linux or windows from it without actually installing it.

Anyway, back ontopic: where did you get the idea to RM -RF /usr/lib?

hassamahmed786 2010-11-23 06:16

Re: Boot Message: "System Malfunction Shutdown in 10s"! What is this?
 
hey do u know what to do if my NOKIA N900 sys MALFUNCTION! DEVICE SHUTDOWN IN 10S please help me


All times are GMT. The time now is 11:30.

vBulletin® Version 3.8.8