Help With eMMC and N900 :(
 

My Nokia N900 Will No Longer Flash The eMMC Image After Installing The MeeGo FirmWare, I Flashed Back To Maemo, But It Will Not Allow eMMC To Flash Here's What I Get,

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.

It Finds The Phone But Will Not Flash, Any Ideas.?

Thank You,

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Can Aneone Help Me With This Or No.?

I Really Could Do With Some Answers.!

Thank You,

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Did you notice this?

Flashing the eMMC in the N900

When flashing the eMMC content, always flash the FIASCO/Rootfs image first, then the eMMC. Do not boot up the device between the two!

Re: Help With eMMC and N900 :(
 

im assuming you have the right USB drivers as youve done it before...

libusb
USB library (only for Windows and Mac OS X installations)

http://pc-connectivity.garage.maemo.....1.12.1.tar.gz


ive done both, flash eMMC first then FW, and visa versa. never had a problem.

Re: Help With eMMC and N900 :(
 

I Can Flash The OS 100% Fine, Just Will Not Allow Me Todo eMMC I Dont Understand.?

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

how long do you wait...

mine took a few seconds, but people have said it sometimes takes a while longer? for it to find phone again...

Re: Help With eMMC and N900 :(
 

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting. ((Waiting For Devoce Here))
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101 ((Finds My Phone))
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode. ((Boots Into Flash Mode))
Suitable USB device not found, waiting. ((Looses Phone))

Thank You,

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

the only problems i seem to have are stupid ones,

you aint doing anything silly

you have full battery?
got the eMMC in your flasher directory?

also...would it not be easier to rename the eMMC to just rx51 to eliminate spelling errors and easier input

Re: Help With eMMC and N900 :(
 

No Errors You Can Use TAB<--> And It Auto Picks Up File.!

Yes Battery Is Full,

Funny Tho, Ive Mangaed To Flash It Many Times Before But Since I Flashed The MeeGo OS I Am Unable Too.

Hmmm

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

hmmmm... i wouldnt know what the MeeGo OS would do to phone, as it was basically an Alpha Beta. is there nothing in the MeeGo forum about it? im sure a few people have flashed to meego and back again...

Re: Help With eMMC and N900 :(
 

Re: Help With eMMC and N900 :(
 

Still Unable To Flash eMMC Even After Downloading New FirmWare, I Wonder Whats The Problem.?

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Let´s try to brake this down

- You have flashed vanilla image?
- Tell me how exactly you are trying to flash emmc? (whole work flow and order of things what you do)

I gave up with my quest to find responsiveness problem´s source on my device and flashed vanilla and emmc. I noticed that i could not flash emmc with current guide. Have to use vanilla´s guide to emmc flash. I think that guide needs really really good care and some Q&A testing.

http://wiki.maemo.org/Updating_the_tablet_firmware

Re: Help With eMMC and N900 :(
 

Window 7 64x - Xp Mode - Start - Run - Cmd - Enter

cd c:\flash

c:\flash

flasher-3.5.exe -F OSImage.bin -f -R :- Writes Perfectly
flasher-3.5.exe -F eMMCImage.bin -f -R :- Finds Phone Puts It Into Flash mode, Then Looses Connection, Then Hangs On Looking For Device

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

When I flashed my N900 firmware/fiasco, in this step, right after flasher had exited on my win xp prompt my n900 booted and asked pin code. Did this happen to you?

I turned off my device (long press power key). Took usb cable off from N900 (left hooked to my computer). Waited so that screen is completely off. Pushed "u"-key and attached usb cable. N900 boots in flash mode. Started flasher from command prompt with switches and emmc image/vanilla.

Re: Help With eMMC and N900 :(
 

No Pin.?

It Finds Image It Finds Phone,

As It Puts The Phone In Flasher Mode, Which It Should Already Be, When Connecting And Holding "U"

Im Just Baffeled.!

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Be really specific.
Here it is how It went on me

1. Windows xp > cmd
2. USB attached to computer
3. "u"-key + attached micro-usb to N900
--> N900 boots to flash mode (screen with little usb-icon in upper right)
4. started flasher with fiasco/firmware image
5. flasher finds phone and uploads it
6. flasher exits back to prompt
7. N900 boots and asks my pin code (didn't type it)
8. (windows finds device as mass storage here)
9. I shut down N900, long press power button while in pin screen
10. Remove micro usb from n900
11. I start again from step 3. but now flasher with vanilla/emmc image

Re: Help With eMMC and N900 :(
 

OS

1. Windows xp > cmd
2. USB attached to computer
3. "u"-key + attached micro-usb to N900
--> N900 boots to flash mode (screen with little usb-icon in upper right)
4. started flasher with fiasco/firmware image
5. flasher finds phone and uploads it
6. flasher exits back to prompt
7. N900 boots and asks my pin code
8. (windows finds device as mass storage here)
9. I shut down N900, long press power button
10. Remove micro usb from n900

eMMC

1. Windows xp > cmd
2. USB attached to computer
3. "u"-key + attached micro-usb to N900
--> N900 boots to flash mode (screen with little usb-icon in upper right)
4. started flasher with eMMC image
5. flasher finds phone

Here Is The Error,

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Xenon-Elite>cd C:\flash

C:\flash>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f
-R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.

See How It Boots It Into Flash Mode Then Loses Connection.!

Anthony- Curtis

Re: Help With eMMC and N900 :(
 

P.S Is This Fiasco/Firmware A Spercific One To Flash With As Im Using,

RX-51_2009SE_3.2010.02-8.203.1_PR_COMBINED_203_ARM.bin

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

OK. I would like to know did you do exactly as I did? I mean exactly! This is really really important.

Fiasco/firmware depends on your location/country and if I remember correctly the vanilla/emmc image is general "RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin" image to all.

Re: Help With eMMC and N900 :(
 

What Do You Mean Exaclty, I Listed The Order Of What I Did Just When It Comes To The eMMC Image It Dont Want To Play Nice,

I Have Flashed It Before So I Know What I Am Doing, Its Just Being Nauty For The eMMC Image

So I Guess Yeah I Did Exactly As You Did Else I Would Not Have Been Able To Flash OS.!

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

I Just Found This, This May Be Why She Not Listening,

When It Reboots Phone After Finding The eMMC Image It Obv D/c And Then R/c When It R/c I Looked In My Computer - Mange And There Are 3 Drivers Missing Virtual PC Intergration Device, So Im Guessing It Might Have Somthing Todo With The Problem, I Downloaded The Lib0 USB Drivers But They Will Not Install Of Them, Hmmmmmm.?

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

My guide is different than guide in wiki (at least for vanilla/emmc) and i have seen n+1 number of different guides in blogs and here where people FIRST run flasher and AFTER that connect N900. In my opinion these kinds of "little" things matter A LOT.

I think that reason for little variation inguides is because of Win xp/Vista 32&64/ 7 32&64 and it could be that all these OS need a BIT little workflow. I do not know or i´m not sure about this just wild guess.

Guess is not enough in matter of how you did try to flash you emmc/vanilla. Please try again with emmc and with both workflows first mine and then the one in wiki :) Report here.

Re: Help With eMMC and N900 :(
 

No Its Nothing Todo With The Problem As There Still There When The Phone Has Been D/c Grrr.! Thought I Was On To Somthing Then.!

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Slender Do You Have MSN.?

Re: Help With eMMC and N900 :(
 

Im Curently Flashing OS Naw, All Working So Far.!

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

OS Flash Sucess,

Power Off Phone,

Time For eMMC.!

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\XPMUser>c c:\flash
'c' is not recognized as an internal or external command,
operable program or batch file.

C:\Documents and Settings\XPMUser>cd c:\flash

C:\flash>flasher-3.5.exe -F RX-51_2009SE_3.2010.02-8.203.1_PR_COMBINED_203_ARM.b
in -f -R
flasher v2.5.2 (Sep 24 2009)

SW version in image: RX-51_2009SE_3.2010.02-8.203.1_PR_203
Image 'kernel', size 1704 kB
Version 2.6.28-20094803.3+0m5
Image 'rootfs', size 158464 kB
Version RX-51_2009SE_3.2010.02-8.203.1_PR_203
Image 'cmt-2nd', size 81408 bytes
Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
Version BB5_09.36
Image 'cmt-mcusw', size 5824 kB
Version rx51_ICPR82_09w47
Image '2nd', size 14720 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.4.4+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.4.4+0m5
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': <no version>
Sending xloader image (14 kB)...
100% (14 of 0 kB, avg. 14 kB/s)
Sending secondary image (106 kB)...
100% (106 of 0 kB, avg. 106 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 0 kB, avg. 79 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 0 kB, avg. 507 kB/s)
Sending cmt-mcusw image (5824 kB)...
100% (5824 of 0 kB, avg. 5824 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1704 kB)...
100% (1704 of 0 kB, avg. 1704 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (158464 kB)...
100% (158464 of 0 kB, avg. 158464 kB/s)
Finishing flashing... done
CMT flashed successfully

C:\flash>flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin
-f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8.203.1_PR_203
Booting device into flash mode.
Suitable USB device not found, waiting.

Re: Help With eMMC and N900 :(
 

btw. what Windows you have?(bits also)

Re: Help With eMMC and N900 :(
 

Windows 7 64x

Re: Help With eMMC and N900 :(
 

Is it fully charged?

Re: Help With eMMC and N900 :(
 

Yup Its 100%

Re: Help With eMMC and N900 :(
 

Do You Have Instant Messaging Client It'd Be Easier To Talk.?

Anthony-Curtis

Re: Help With eMMC and N900 :(
 

I can´t send private message to you.

Re: Help With eMMC and N900 :(
 

and you succeeded flashing using win7 64bit before?? Just asking because I had to do it using XP and my 7 64bit moaned the same as yours does

Re: Help With eMMC and N900 :(
 

Ok only read bit of the thread, when i flashed my emmc in XP mode on Win7 64bit, i had to attch the phone in XP mode twice, and 2nd time it loaded different drivers if i remember correctly.

make sure when the phone connects for EMMC flash it loads drivers properly.

I didnt have any problems with firmware flash

Re: Help With eMMC and N900 :(
 

I had the same problem, I solved with linux, with windows me hangs always be with windows 7 64 with windows xp mode. and Windows XP 32

Re: Help With eMMC and N900 :(
 

aw men! i should've post on this thread!!!!

Re: Help With eMMC and N900 :(
 

hi xenon..its seem i have same problems.
i was succesful flashing the 'Fiasco' image, n then i flash the emmc.
til its reach the line (same as your's) the tablet stop..after 5 dots walking few second

it seem the phone fail to enter flashing mode.. n pc continues waiting until no end... or anyone knows?

Re: Help With eMMC and N900 :(
 

shocking no one posted a fix after all this time.

RESTART COMPUTER

PRESS F8 BEFORE WINDOWS LOGO APPEARS

SELECT "DISABLE DRIVER SIGNATURE ENFORCEMENT"

retry flashing with emmc

worked for me...