MicroB wont start after (leaked)PR1.2 RC flash
 

I flashed PR1.2. RC and found MicroB is not starting anymore. Everything else works just fine. Anyone with similar problem or idea how it can be solved?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

I don't have this issue. Try rebooting?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Already tried...2 times :-)

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

It is possible the browser is still running. If you are not afraid of the mighty Terminal, go there and type:

If the browser is there, type the number on it´s left side, for example mine was 1562.

Then try again.

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

@AtteK0
If browser was running reboot should have solved the issue. Anyway TOP is showing /usr/sbin/browserd running. Killing it doesnt help the situation.

PS. I am not afraid of terminal, been using Linux/FreeBSD nearly 10 years ;-)

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

hmm dont use the leaked pr 1.2 then your problem are solved

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Lol, I am more afraid of the Terminal than I am afraid of puppies (quite terrifying creatures when hungry and in groups, though...)

I haven´t done this for too long... Sorry for the underestimating and stuff... :o

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

@AtteK0
No offense taken buddy, you were just trying to help! ;-)

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Well if you want to tinker and use experimental stuff, be prepared to learn. I did. It isn't always easy, but it will only help in the long run. Just read as much as possible, trust the community, and be patient.

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

i'm loving the pr1.2 experience..

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Flash the eMMC?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

broken eMMC has caused pretty weird functionality to my web browser somewhere around PR1.0 and PR1.1.

reflashing eMMC fixed everything.

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

When I broke my microB, I too had to reflash the eMMC to fix it. Flashing root wasn't enough for me.

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Kil browser process
remove .mozilla directory from home
(bookmarks etc. will be gone)
kill browserd process
start browser

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Lol but why is this update 10?? i thought the first number was the number of the update. so we went from 3 to 10?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

:cool:
Exactly !
And stop asking for 1.2 problems people, come on... :rolleyes:

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

what is the eMMC? is it the rootfs?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Reflashing solved the problem. Now almost everything works. Only exceptions are BrainParty(i don't really care) and rootsh. rootsh gives "file corrupted" when trying to install. Any ideas?

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

nope, it is /home/ if I've understood correctly.

normal fw = rootfs

Re: MicroB wont start after (leaked)PR1.2 RC flash
 

Just wanted to let everyone know that everything is working fine for me. I updated last night, tried almost everything and so far so good. I didn't flash the mass memory only rootfs. Restored all the programs (some didn't restore, but i don't care about those) I even flashed Lehto 950/500 kernel and so far so good. Knock on wood. I didn't disable all the transitions for a faster experience. I don't think that help if the FW has bugs in it, but just wanted to let everyone know.