maemo.org - Talk
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Android (https://talk.maemo.org/forumdisplay.php?f=54)
-   -   [How To] Nitdroid-Installer: install GingerBread N12 UMay (https://talk.maemo.org/showthread.php?t=72365)

Fabry 2011-04-20 19:00
[How To] Nitdroid-Installer: install GingerBread N12 UMay
 
1 Attachment(s)
This guide is for whom want to use Nitdroid-Installer to install Gingerbread N12 UMay
  1. Download lastest Nitdroid Installer (http://downloads.nitdroid.com/nitins....2.7_armel.deb) and install it
    If you use dpkg -i to install and you not have an older version (i.e. 0.2.6) already installed, you should manage by hand all dependecies (i.e. multiboot, rootsh, ...etc).
    As workaround please before install 0.2.6 from repository and then manual update to 0.2.7.
    This can be done with:
    Code:
    sudo gainroot
    apt-get install nitdroid-installer
    dpkg -i /home/user/MyDocs/nitdroid-installer_0.2.7_armel.deb
  2. Create on folder /home/user/MyDocs/ a text file named "nitdroid.manifest" and copy into it this text:
    Code:
    #
    # Manifest file for NITDroid
    #

    # Root filesystem tar balls
    rootfs                http://downloads.nitdroid.com/e-yes/N12_UMay.tar.bz2                                        a5846b46bce11bebbe3d3b0dab1663d6

    # Deb packages
    package                http://downloads.nitdroid.com/e-yes/nitdroid-kernel-2.6.28-07_7-rc7_armel.deb                22b5eb2a0047bf131898a90774a70912
    Or use the prebuild manifest attached to this post (decompress it in MyDocs)
  3. Connect N900 to internet using UMTS or WiFi
  4. Open an xterm console and type nitdroid file:///home/user/MyDocs/nitdroid.manifest to start installation process
  5. Answer YES (upper case) to the question appeared and wait for the Nitdroid N12 UMay download and then installation process

Now directly tested by me and I confirm that it works using the supplied (attached zip) manifest!


Notes:
  • Installer writes its log on file /home/user/MyDocs/.nitdroid/installer.log
    If you have problems please read it to see what goes wrong
  • If you have problems of truncated files during download, please delete all files from directory .nitdroid before retry.
    Code:
    rm -f /home/user/MyDocs/.nitdroid/*
  • To avoid N900 download problems you can download all files mentioned on manifest with a PC and copy them to N900 within .nitdroid directory (on MyDocs shared disk).
    Doing so, when you will start Nitdroid-Installer, it will find out the needed files already downloaded and it will start installation without download them
  • A possible but not tested manifest for version 2.3.7 can be found here: http://talk.maemo.org/showpost.php?p...&postcount=116

mukati 2011-04-20 22:15
Re: [How To] Nitdroid-Installer: workaround to install GingerBread N11 Vostok
 
[is this installing to a memory card or internal memory?

Fabry 2011-04-21 00:21
Re: [How To] Nitdroid-Installer: workaround to install GingerBread N11 Vostok
 
Quote:
Originally Posted by mukati (Post 992867)
[is this installing to a memory card or internal memory?
It uses Nitdroid-Installer so it is an installation to external MicroSD

e-yes 2011-04-21 01:26
Re: [How To] Nitdroid-Installer: workaround to install GingerBread N11 Vostok
 
Modification is NOT needed, actually. If you take a look onto nitdroid-installer sources (yeah, it is source by itself :) ) you'll find function "get_opts". look at parameter near "http".

Fabry 2011-04-21 12:27
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Revised guide, but I can't test it

Storm_11 2011-04-22 10:59
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
doesnt work for me, I get the error message

dont understand option 'MANIFEST_FILE.......' (with the path that youve suggested)

Fabry 2011-04-22 11:42
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Storm_11 (Post 993640)
doesnt work for me, I get the error message

dont understand option 'MANIFEST_FILE.......' (with the path that youve suggested)
Try nitdroid file:/home/user/MyDocs/nitdroid.manifest and tell me if it works

smartamrit 2011-04-22 11:45
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Fabry (Post 993653)
Try nitdroid file:/home/user/MyDocs/nitdroid.manifest and tell me if it works
it says failure bailing out

Fabry 2011-04-22 11:49
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by smartamrit (Post 993654)
it says failure bailing out
Sorry some errors typing (three / needed) nitdroid file:///home/user/MyDocs/nitdroid.manifest

If it doesn't work yet, I must do some tests myself to find out how the option must be written

smartamrit 2011-04-22 11:52
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Thanks its working

jakiman 2011-04-23 01:39
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Once this is done and end up woth default kernel and Nitdroid in the multiboot list, what's the easiest and best way to add power kernel to multiboot? Is it same as previous Nitdroid builds? (steps mentioned in the old Nitdroid guide below)

http://forum.nitdroid.com/index.php?topic=84.0

mukati 2011-04-23 02:47
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
I am still getting bailing out how do i fix this

rishabsp 2011-04-23 05:19
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
I have already installed it from the wiki but I cant see android market in application menu can anyone tell me what the problem is?

Garcel 2011-04-23 06:11
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Thanks Fabry a fantastic work you got there. Forgive my noobness but what will happen if I try this while My nitdroid 0.0.9 is still currently installed? (installed in memory card) I don't want to run into a boot loop thanks

F2thaK 2011-04-23 06:15
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
does this make calls / sms ?

thanks

Garcel 2011-04-23 06:20
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
@f2thak

Of course not. This is just another/easy way of installing nitdroid.

Storm_11 2011-04-23 07:38
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
all worknig fine here too. thanks!

kyllerbuzcut 2011-04-23 09:26
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
can I just ask what this file is please? I couldn't see it in the original N11 stuff:
ofono047_oril008

Thanks.

EDIT: Downloaded and applied it anyway lol. Now off to see if nitdroid still works:)

money541988 2011-04-23 10:18
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Failure............Bailing out
how to fix it????

jakiman 2011-04-23 14:44
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by kyllerbuzcut (Post 994052)
can I just ask what this file is please? I couldn't see it in the original N11 stuff:
ofono047_oril008
It's an updated ofono driver package:
http://forum.nitdroid.com/index.php?topic=1380.0

raaj13 2011-04-23 17:48
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
just a problem my internet is not working even after creating apn and selecting it.
Do you guys have internet working?

Armand360 2011-04-24 01:18
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?

raaj13 2011-04-24 07:07
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Armand360 (Post 994357)
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?
you can try manual installation guide given on wiki

Armand360 2011-04-24 08:38
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
saw a few, but this seems to be a lot easier seeing that it's automated :P i'd like my nitdroid to be installed on my external memory card so if i were to install it manually after installing the 0.0.8 version (nitdroid installer), which manual installation should i use to install it on my memory card?

Fabry 2011-04-25 01:05
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Armand360 (Post 994357)
the download is taking quite a while, so is it possible to download the 137mb file myself and then put it in MyDocs and let the installation proceed from there on? what should be edited in the manifest file?
Download the file yourself and put it in /home/user/MyDocs/.nitdroid/
I have never tried but I think nitroid installer will use it without redownload it

Fabry 2011-04-25 01:08
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by money541988 (Post 994070)
Failure............Bailing out
how to fix it????
Probably you have done some typing errors during manifest creation.

Check your manifest file, common errors are:
  • ofono047_ori1008.tar.bz2 instead of ofono047_oril008.tar.bz2
    It is ORIL (lower case) the right name
  • nitdroid-kernel-2.6.28-06_finall_armel.deb instead of nitdroid-kernel-2.6.28-06_final1_armel.deb
    It is FINAL1 and not FINALL

Fabry 2011-04-25 01:11
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Quote:
Originally Posted by Garcel (Post 994003)
Thanks Fabry a fantastic work you got there. Forgive my noobness but what will happen if I try this while My nitdroid 0.0.9 is still currently installed? (installed in memory card) I don't want to run into a boot loop thanks
I suppose that simply you will loose your 0.0.9 installation that will be overwritten by 2.3.3 installation but I haven't personally tried

LaZyGolfer 2011-04-28 17:13
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
getting Failure, bailing out aswell... tried to copy the files in .nitdroid folder but stays the same over and over.

copy pasted the manifest text on page 1, checked for typo's but it perfectly the same... so don't know why it inst working.

in the log file it just stops after downloading the vostok file (dont even know why it's downloading when I have the file in the directory?)

*edit* k seems it works now, I guess when the server is lagged... things won't go smooth with the install, so best bet it try and try I guess.

maemouser1 2011-04-29 17:02
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
Hi can anyone help me please? I am getting the following error when trying to install this:
Code:
Formatting /dev/mmcblk1p2 (ext3) ...done
Mounting /dev/mmcblk1p2 ...done
Extracting N11_Vostok.tar.bz2 ...FAILURE. Bailing out.
I don't know what's wrong. When extracting the archive using bzip2 -d it works. Here is the output from the log file:

Code:
tar: system/bin/ln: Cannot create symlink to `toolbox': No such file or directory
system/bin/sgx_init_test
tar: system/bin/sgx_init_test: Cannot open: No such file or directory
system/bin/ping
tar: system/bin/ping: Cannot open: No such file or directory
system/bin/camtest
tar: system/bin/camtest: Cannot open: No such file or directory
system/bin/pvr2d_test
tar: system/bin/pvr2d_test: Cannot open: No such file or directory
system/bin/fsck_msdos
tar: system/bin/fsck_msdos: Cannot open: No such file or directory
system/bin/stop
tar: system/bin/stop: Cannot create symlink to `toolbox': No such file or directory
system/bin/setprop
tar: system/bin/setprop: Cannot create symlink to `toolbox': No such file or directory
ueventd.nokia.rc
tar: ueventd.nokia.rc: Cannot open: Read-only file system
ueventd.rc
tar: ueventd.rc: Cannot open: Read-only file system
usr/
tar: usr: Cannot mkdir: Read-only file system
usr/sbin/
tar: usr/sbin: Cannot mkdir: No such file or directory
usr/sbin/fbset
tar: usr/sbin/fbset: Cannot hard link to `bin/cp': No such file or directory
usr/sbin/chroot
tar: usr/sbin/chroot: Cannot open: No such file or directory
usr/sbin/nbd-client
tar: usr/sbin/nbd-client: Cannot hard link to `bin/cp': No such file or directory
usr/bin/
tar: usr/bin: Cannot mkdir: No such file or directory
usr/bin/which
tar: usr/bin/which: Cannot hard link to `bin/cp': No such file or directory
usr/bin/less
tar: usr/bin/less: Cannot hard link to `bin/cp': No such file or directory
usr/bin/pmap
tar: usr/bin/pmap: Cannot hard link to `bin/cp': No such file or directory
usr/bin/find
tar: usr/bin/find: Cannot hard link to `bin/cp': No such file or directory
usr/bin/readlink
tar: usr/bin/readlink: Cannot hard link to `bin/cp': No such file or directory
usr/bin/test
tar: usr/bin/test: Cannot hard link to `bin/cp': No such file or directory
usr/bin/dirname
tar: usr/bin/dirname: Cannot hard link to `bin/cp': No such file or directory
usr/bin/free
tar: usr/bin/free: Cannot hard link to `bin/cp': No such file or directory
usr/bin/md5sum
tar: usr/bin/md5sum: Cannot hard link to `bin/cp': No such file or directory
usr/bin/sort
tar: usr/bin/sort: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bzip2
tar: usr/bin/bzip2: Cannot hard link to `bin/cp': No such file or directory
usr/bin/seq
tar: usr/bin/seq: Cannot hard link to `bin/cp': No such file or directory
usr/bin/yes
tar: usr/bin/yes: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tee
tar: usr/bin/tee: Cannot hard link to `bin/cp': No such file or directory
usr/bin/[
tar: usr/bin/[: Cannot hard link to `bin/cp': No such file or directory
usr/bin/id
tar: usr/bin/id: Cannot hard link to `bin/cp': No such file or directory
usr/bin/head
tar: usr/bin/head: Cannot hard link to `bin/cp': No such file or directory
usr/bin/od
tar: usr/bin/od: Cannot hard link to `bin/cp': No such file or directory
usr/bin/basename
tar: usr/bin/basename: Cannot hard link to `bin/cp': No such file or directory
usr/bin/nohup
tar: usr/bin/nohup: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tr
tar: usr/bin/tr: Cannot hard link to `bin/cp': No such file or directory
usr/bin/strings
tar: usr/bin/strings: Cannot hard link to `bin/cp': No such file or directory
usr/bin/unzip
tar: usr/bin/unzip: Cannot hard link to `bin/cp': No such file or directory
usr/bin/time
tar: usr/bin/time: Cannot hard link to `bin/cp': No such file or directory
usr/bin/unlzma
tar: usr/bin/unlzma: Cannot hard link to `bin/cp': No such file or directory
usr/bin/expr
tar: usr/bin/expr: Cannot hard link to `bin/cp': No such file or directory
usr/bin/install
tar: usr/bin/install: Cannot hard link to `bin/cp': No such file or directory
usr/bin/renice
tar: usr/bin/renice: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bunzip2
tar: usr/bin/bunzip2: Cannot hard link to `bin/cp': No such file or directory
usr/bin/lzma
tar: usr/bin/lzma: Cannot hard link to `bin/cp': No such file or directory
usr/bin/du
tar: usr/bin/du: Cannot hard link to `bin/cp': No such file or directory
usr/bin/xargs
tar: usr/bin/xargs: Cannot hard link to `bin/cp': No such file or directory
usr/bin/bzcat
tar: usr/bin/bzcat: Cannot hard link to `bin/cp': No such file or directory
usr/bin/killall
tar: usr/bin/killall: Cannot hard link to `bin/cp': No such file or directory
usr/bin/[[
tar: usr/bin/[[: Cannot hard link to `bin/cp': No such file or directory
usr/bin/cut
tar: usr/bin/cut: Cannot hard link to `bin/cp': No such file or directory
usr/bin/lzcat
tar: usr/bin/lzcat: Cannot hard link to `bin/cp': No such file or directory
usr/bin/fuser
tar: usr/bin/fuser: Cannot hard link to `bin/cp': No such file or directory
usr/bin/env
tar: usr/bin/env: Cannot hard link to `bin/cp': No such file or directory
usr/bin/wc
tar: usr/bin/wc: Cannot hard link to `bin/cp': No such file or directory
usr/bin/split
tar: usr/bin/split: Cannot hard link to `bin/cp': No such file or directory
usr/bin/chrt
tar: usr/bin/chrt: Cannot hard link to `bin/cp': No such file or directory
usr/bin/realpath
tar: usr/bin/realpath: Cannot hard link to `bin/cp': No such file or directory
usr/bin/tail
tar: usr/bin/tail: Cannot hard link to `bin/cp': No such file or directory
tar: sdcard: Cannot unlink: Read-only file system
tar: sbin/killall5: Cannot unlink: Read-only file system
tar: sbin/poweroff: Cannot unlink: Read-only file system
tar: sbin/halt: Cannot unlink: Read-only file system
tar: sbin/ifup: Cannot unlink: Read-only file system
tar: sbin/init: Cannot unlink: Read-only file system
tar: sbin/hwclock: Cannot unlink: Read-only file system
tar: sbin/pivot_root: Cannot unlink: Read-only file system
tar: sbin/lsmod: Cannot unlink: Read-only file system
tar: sbin/swapoff: Cannot unlink: Read-only file system
tar: sbin/ifconfig: Cannot unlink: Read-only file system
tar: sbin/nameif: Cannot unlink: Read-only file system
tar: sbin/ifdown: Cannot unlink: Read-only file system
tar: sbin/getty: Cannot unlink: Read-only file system
tar: sbin/mkswap: Cannot unlink: Read-only file system
tar: sbin/route: Cannot unlink: Read-only file system
tar: sbin/reboot: Cannot unlink: Read-only file system
tar: sbin/swapon: Cannot unlink: Read-only file system
tar: sbin/modprobe: Cannot unlink: Read-only file system
tar: sbin/losetup: Cannot unlink: Read-only file system
tar: sbin/ueventd: Cannot unlink: Read-only file system
tar: sbin: Cannot utime: Read-only file system
tar: sbin: Cannot change ownership to uid 0, gid 0: Read-only file system
tar: sbin: Cannot change mode to rwxr-xr-x: Read-only file system
tar: Exiting with failure status due to previous errors
!!! ERROR:2 tar xv
*** ERROR - CLEANING UP THE CRAP
There are more similar errors. I don't get it. Is it permission or what? Why am I getting these errors?

sagor_sb37 2011-05-06 16:08
Re: [How To] Nitdroid-Installer: install GingerBread N11 Vostok
 
plz help me guys i m using android 2.2.1 ........but cant get rid of airplale mode............. plz help me to get red of air plane mood........

eagle-eyes 2011-05-08 10:35
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Quote:
Originally Posted by Fabry (Post 992740)
This guide is for whom want to use Nitdroid-Installer to install Gingerbread N12 UMay
  1. Download lastest Nitdroid Installer (http://downloads.nitdroid.com/nitins....2.7_armel.deb) and install it
    If you use dpkg -i to install and you not have an older version (i.e. 0.2.6) already installed, you should manage by hand all dependecies (i.e. multiboot, rootsh, ...etc)
  2. Create on folder /home/user/MyDocs/ a text file named "nitdroid.manifest" and copy into it this text:
    Code:
    #
    # Manifest file for NITDroid
    #

    # Root filesystem tar balls
    rootfs                http://downloads.nitdroid.com/e-yes/N12_UMay.tar.bz2                a5846b46bce11bebbe3d3b0dab1663d6

    # Deb packages
    package                http://downloads.nitdroid.com/e-yes/nitdroid-kernel-2.6.28-07_rc3_armel.deb                7a81c6815ba8748e5bd42e03ddd699cb

    # End.
  3. Open an xterm console and type nitdroid file:///home/user/MyDocs/nitdroid.manifest to start installation process
  4. Answering YES (upper case) to the question appeared and wait for the Nitdroid N11 Vostok download and then installation process
thx but its not working
say good here we go ....
downloading nitdroid,manifest...failure. bailing out :(
any ideas
thxs

Wreck 2011-05-08 15:16
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Quote:
Originally Posted by eagle-eyes (Post 1002051)
thx but its not working
say good here we go ....
downloading nitdroid,manifest...failure. bailing out :(
any ideas
thxs
You could just use this tutorial.
http://wiki.maemo.org/Nitdroid_easy_install_on_EMMC

At installing the N11 just change everything that says N11 to N12. Worked for me :)
Awesome that SMS is working now, accelerometer is also working partialy. Holding the device upside down is the center.

taril 2011-05-08 18:45
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Downloading is hell-slow. 30 kb/s

Nokia 5700 2011-05-08 19:07
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
I don't get it... What does Market Out of the Box mean when it's not even in the menu?
I have successfully overwritten 2.2.1/0.0.9 with N12, and all my apps and settings are there. Just not Market... Should I reset all of it to get Market or is it something else?

Fabry 2011-05-08 19:40
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Quote:
Originally Posted by eagle-eyes (Post 1002051)
thx but its not working
say good here we go ....
downloading nitdroid,manifest...failure. bailing out :(
any ideas
thxs
It is probably only a network error.

If Nitroid installer fails to download the files it emits error "bailing out"

blopa 2011-05-10 01:25
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
I can't get it to work. Does anybody did this and worked?

IcyMoustache 2011-05-11 13:48
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
One quick question, In the following can you redirect


# Deb packages
package http://downloads.nitdroid.com/e-yes/..._rc3_armel.deb 7a81c6815ba8748e5bd42e03ddd699cb

also to refer to a local file by specifying the file path??

(say if I already downloaded the file on a faster connection)

german.cadenas 2011-05-11 16:36
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Hi. For those who downloaded the files nitdroid and N12_UMay.tar.bz2 - kernel-2.6.28-07_rc3_armel.deb in a PC and copied to the N900 can do the following:

Modify the nitdroid.manifest with the following contents:

Code:
# Root filesystem tar balls
rootfs file:///home/user/MyDocs/N12_UMay.tar.bz2 a5846b46bce11bebbe3d3b0dab1663d6

# Deb packages
package file:///home/user/MyDocs/nitdroid-kernel-2.6.28-07_rc3_armel.deb 7a81c6815ba8748e5bd42e03ddd699cb

# End.
and then use the following command:

nitdroid file:///home/user/MyDocs/nitdroid.manifest

and type YES.

Greetings.

Blazeuk 2011-05-12 00:34
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
Same problem.
It bails after formatting.
Downloading nitdroid.manifest....Failure. Bailing out.
I have tried on 3 different networks,same problem.
transfered all files using WinSCP.
I also tried the manual method from the Wiki.
Wont go any further after running command: bzip2 -d N12_UMay.tar.bz2
I also tried the revised .manifest by german.cadenas
 Still no joy.
Any ideas?

Edit: I managed to get it working. When the bzip2 command hangs i just waited a little longer and it unpacked.

guoyuucla 2011-05-29 01:47
Re: [How To] Nitdroid-Installer: install GingerBread N12 UMay
 
HELP NEEDED!

I installed the nitdroid to a new partition on emmc without problem.
But after it boot into nitdroid, I cannot find sd card or mydocs folder for some reason. Because of this, many applications like camera and music player won't work properly. they shows " the phone does not have a sd card inserted" message everytime.

Could someone let me know how to solve this issue? thanks.:cool:


All times are GMT. The time now is 12:04.
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8