Flashing emmc problem - at 20%
 

Hello.
I reflashed my n900 few times and everything was good.

Today I want to reflash my n900 and I can't reflash my emmc - it stops at 20% :/
Rootfs flash successful and n900 working normal - I have clean mmc (no standart music and videos), but it's working. PC detect n900 normal, I can tranfer files, can play music etc.

But why flasher can't flash it ?
Please answer.

Re: Flashing emmc problem - at 20%
 

OK. It's solved. I check mmc by gparted - no errors. Remove battery for 10mins and reflash on another PC and it's success :)

Re: Flashing emmc problem - at 20%
 

hi... i would like if u tell me how you solve the problem i got the same too, and if u can tell me the specifications of the second computer where you make it works ill be grateful.

Re: Flashing emmc problem - at 20%
 

@n900

hey i got the same problem !! i successfully flashed the fiasco but emmc is stucking at 20%.

morover, my pc is nt detecting my n900....n wen i start my fon without SIM, i get a msg " unable to establish connection contact service "

pls help me out...really messed up with all....

Re: Flashing emmc problem - at 20%
 

your problem is nokia suite or pc suite or...
you just go to "msconfig" in the run of windows and then go to "startup" tab
anh then disable any program that associated with your phone like (nokia suite or pc souti or...)
and then click "ok" and reboot your pc .
and then reflash your phone

Re: Flashing emmc problem - at 20%
 

Instead of disabling and rebooting:

You can also run services.msc and stop the Nokia service called ServiceLayer. This does not require a reboot.

Re: Flashing emmc problem - at 20%
 

problem of pc's driver

Re: Flashing emmc problem
 

hi everyone
im new to maemo and facing a problem during flashing emmc vanilla.
every time i try to flash n900 on windows xp it flash fisco image successfully but when ever i try to install emmc it says

C:\Program Files\maemo\flasher-3.5>
C:\Program Files\maemo\flasher-3.5>flasher-3.5 -FRX-51_2009SE_10.2010.13-2.VANIL
LA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.

i do not know what to do and need help fron you guys....
thanks

Re: Flashing emmc problem - at 20%
 

I just recently flashed my N900 twice, and I detailed a foolproof procefure to do so here: http://talk.maemo.org/showpost.php?p...94&postcount=7

Notice you should always flash the rootfs after the EMMC, because when flashing the EMMC part of the rootfs is altered. Just mentioning this because you said you could flash the rootfs but not the EMMC, and I don't know if this is the sequence you were going to use.

In cases where the rootfs is faulty enough that the EMMC can't be flashed first, then you must flash 3 times (rootfs, then EMMC, and again rootfs).

Let me know if you have any questions. :)

Re: Flashing emmc problem
 

You have windows xp sp2 or sp3? to flash n900s emmc image you will need atleast windows xp sp3, it wont work on sp2.

Re: Flashing emmc problem - at 20%
 

Absolutely correct!
And furthermore you are trying to flash an eMMC image with a lower firmware version. I have never tried such thing, so I do not know if this may cause your troubles. Probably. Try appropriate eMMC
image.