[Announce] Easy Chroot package for MeeGo Harmattan
 

Qole (Alan Bruce) previous work on Easy Chroot (easy-chroot for Maemo 4/5 and HarmChom for Harmattan) is now packaged to MeeGo Harmattan.

What is the "Easy Chroot" package ?
It contains scripts to mount and chroot into images/partitions, i.e., running a different environment inside MeeGo Harmattan without rebooting. For example :
- Easy Debian (with OpenOffice, Gimp, Abiword, Gnumeric, gcc/g++, TeX/LaTeX, etc). Easy Debian package for MeeGo Harmattan is now (04/08/2012) released;
- on-device Maemo 5 SDK or MeeGo Harmattan SDK for software development (with gcc/g++, packaging tools, etc);
- other OS (Ubuntu, etc) with an image.

Downloading & Installing :
1) Easy installation :
Use MeeCatalog (available from Nokia Store), enable the "Community Share Repository" (from rzr), update, update. Then search for "easy-chroot" and install it (version 0.2.0).
or
2) Manual installation :
Download the current release : easy-chroot_0.2.0-1harmattan1_armel.deb. Transfer it to some directory (e.g., "/home/user/") in your Nokia N9/N950 and install it by tapping with a file manager, or using the X-Terminal :
$ devel-su
type the root password (default is rootme), then :
# cd ~user
# dpkg -i easy-chroot_0.2.0-1harmattan1_armel.deb

Dependencies :
1) Harmattan open mode kernel;
or
2) Inception + aegisctl. As the Inception main site is currently down, I will repeat the Inception download and installation instructions.
If you want, download them together here (Inception.zip zipped file).
Unzip the .deb files (opensh is not needed for easy-chroot) to some directory (e.g., "/home/user") in your Nokia N9/N950.
Install "inception_0.2.5_armel.deb" by tapping with a file manager or with "# dpkg -i inception_0.2.5_armel.deb" as root in X-Terminal.
Then type in X-Terminal as user :
$ devel-su -c /usr/sbin/pasiv
type the root password, then confirm with yes. Finally (as user or root) :
$ /usr/sbin/incept aegisctl_1.3_armel.deb
and type the password.

Using Easy Chroot :
1) using Harmattan open mode kernel, in X-Terminal :
$ devel-su
and confirm the root password.
or
2) using Inception, once after reboot it is needed to give chroot permissions, so go to the X-Terminal as user :
$ ariadne /usr/sbin/aegisctl -s
and type the root password. Then enter root with extended permissions :
$ ariadne sh
if asked, type the root password.
1 & 2) Typical use (don't use "FingerTerm" as qchroot doesn't work with it) :
"qchroot" does mounting and chrooting, the most simple syntax is :
# qchroot <image> <mount-dir>
where the "mount-dir" needs 777 permission ($ chmod 777 <mount-dir>).
For example, chrooting Easy Debian image :
# qchroot /home/user/MyDocs/debian-m5-v3e.img.ext2 /.debian
gives the prompt inside Debian :
[root@m5v3e: /]
After exiting ("exit" or Ctrl+D), to close the chroot :
# closechroot <mount-dir>
Or in this example :
# closechroot /.debian

==================================================

Easy Chroot (MeeGo Harmattan version) FAQ :

1) What is the content of easy-chroot package and what the commands do ?
It installs in "/opt/easy-chroot" but links 6 commands to "/bin" (included in user's $PATH) :
- blkid : used by qchroot, qmount, etc to retrieve information about the image file (filesystem type, etc). This file is taken from the the Harmattan SDK armel as MeeGo Harmattan on device doesn't include it.
- closechroot : script to close a mounted chroot, this means killing all the chroot apps and unmounting the bound directories. If there is no argument, tries to use "/home/user/.chroot".
Syntax :
closechroot <mount-dir>
closechroot
- qchroot : script to set up (if necessary) and chroots into a different environment, with shared MeeGo "/home/user", etc.
Syntax : qchroot <image> <mount-dir>
- qmount : script to mount the chroot partition from the image.
Syntax : qmount <image> <mount-dir>
- qmount : script to umount the chroot partition from the image.
Syntax : qumount <mount-dir>
- synchroot : script to synch a mounted chroot; this means copying some important files to the chroot. If there is no argument, tries to use "/home/user/.chroot".
Syntax :
synchroot <mount-dir>
synchroot

2) The scripts are the same from qole's HarmChom ?
They are a little bit modified with full pathname to "modprobe" and "umount" as the default $PATH for user and root in MeeGo Harmattan is different from Maemo 4 & 5. So I avoided modifying the user ".profile" $PATH on MeeGo. V0.2.0 adds the sbin directories to $PATH of root on Debian.

3) Why FingerTerm terminal is not compatible with easy-chroot ?
I don't know, but the fact is qchroot doesn't work when using FingerTerm. It can be installed, but can be used to run the qchroot command. Thanks to users HoldgerN and Kabouik, who discoreved this incompatibility.
(Native) X Terminal, MTermite and BTInput Terminal work with qchroot.

4) Where is the source code ?
Current release : easy-chroot_0.2.0.tar.gz. I will upload it to GitHub and announce here.
Use Harmattan SDK (scratchbox) to create a .deb, using "dpkg-buildpackage -sa -rfakeroot".

5) Change log of easy-chroot for Harmattan ?
* 0.2.0 (18/08/2012) : added sbin directories to $PATH;
* 0.1.0 (03/08/2012) : first version for MeeGo 1.2 Harmattan.
It is also inside the source code.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Great job, thanks!

I detailed it in the other thread, but this one seems more appropriate, especially because you are still testing the package:

I installed your deb, then had an automatic update available for it. I installed it, rebooted, then tried "qchroot /home/user/MyDocs/debian-m5-v3e.img.ext2 /.debian/" after "ariadne aegisctl -s" and "ariadne sh", but I got the following error:

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Which automatic update ???

Try without the trailing "/" :
# qchroot /home/user/MyDocs/debian-m5-v3e.img.ext2 /.debian

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

rebuilt in shared repo ... do you plan to host the sources in vc too ? I can help for that ...

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Thanks. But beware that in your shared repository there are two "easy-chroot" : 0.3.4-0maemo0~rzr1 (for Maemo 5 ?) and 0.1.0-1harmattan1 (for MeeGo Harmattan).

With the rzr share repo, trying to install with "# apt-get install easy-chroot" just install the 0.3.4-0maemo0 version.

What is vc ?

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

I've confirmed that using FingerTerm gives the above qchroot error. Don't ask me why... So, do not use FingerTerm to run qchroot.

Thanks, Kabouik, you and HoldgerN are cited in FAQ #3 above.

And there is not problem with or without the trailing slash ("/").

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

I've already tried with or without the trailing slash, but it gave the same results. The problem is that I'm no longer using FingerTerm to run the qchroot command. And by the way, when I used it, the error message was about mounting on loop0 or something (see the other thread), but had nothing to do with libgtk-x11-2.0.so.0. Here I have this error when using a default Terminal application, or MTermite.

P.S.
HoldgerN is the only one who deserves to be cited in FAQ #3, he was the one who find what caused the problem. I just reported the problem. :p

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

please update upgrade

vc=version control , ie: gitorious , github etc

btw, I can share some rootfs ask me ...


http://rzr.online.fr/q/ubuntu

http://rzr.online.fr/q/rootfs

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

So, do you still have error message when qchroot'ing ? If so, please show it here.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Ok. Now "# apt-get install easy-chroot" works when the Community Shared Repo is enabled.

Ok, thanks for the offer.

Interesting to see Ubuntu with Unity running on Nokia N9/N950. May an "Easy Ubuntu" would be popular.
But my priorities now are Easy Debian and SDK images.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Yes. The error message is the one I reported in post #2. I have it either with regular Terminal applications and with FingerTerm.

By the way, I forgot to answer about the automatic update! My answer: no idea! I just installed the deb, then nothing happened, then an automatic update was available for it, through the usual Harmattan update window. I updated and then tried the commands. Is it possible that it updated to the Maemo version because of the rzr repos? I think everything happened before the package was made available in those repos.

[Edit] Well, actually now, as I seems my version of easy-chroot is "0.3.4.-0maemo0-rzr1. I uninstall it and reinstall your deb.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Yes, as you have rzr share repository enabled, the Maemo version replaced the MeeGo Harmattan one. But then rzr has fixed this version problem. Try it again and tell me whether the error message happens or not.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

I've cited MeeCatalog and your "Community Share Repo" as the recommended way of installing "Easy Chroot" on MeeGo Harmattan.

rzr, could you please remove "easy-deb-chroot" (version 0.9.56-1fremantle1) from your repo ? Because a lot of people could try to install it in on Nokia N9/N950. My "easy-deb-chroot" package for MeeGo Harmattan is almost ready...

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

It works now. The issue was only due to the update that replaced the Meego version with the Maemo one. :)

Now I have to make my AZERTY bluetooth keyboard to be correctly supported, or wait until Javispredo finds a way to make the virtual keyboard work inside Debian. :]

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Excellent !

Try "# synchroot" inside MeeGo (after debian is chrooted). For Maemo 5 it has solved some keyboard problems.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Works great! Unfortunately I'm stuck with VNC for now - don't have a keyboard yet ;).

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Are you using Easy Chroot with Easy Debian using VNC server & client ? À la Android ? If so, please describe how you do it in the new "Easy Debian for MeeGo Harmattan" topic.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

No, I was merely trying to use openoffice and see how the N9 performs, using another device as VNC client and the N9 SDK VNC as server.

I'm happy to see the official easy debian release, thanks!

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

have tried synchroot, but i am not sure what to do to get the vkb. Is it the same as for the javispedro tips?

thanks

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Which image are you using with Easy Chroot ? If it is a Debian image, look at the Easy Debian Harmattan topic. It is explained there (in section "Choosing a Debian image") what synchroot does :
"1 & 2) To physical keyboard (Bluetooth or N950's) work inside LXDE, tap the "Debian Chroot" icon, then open other X Terminal and type :
$ opensh
# synchroot
Some configuration files are now copied to the Debian image. This procedure is needed only once per image."

If you are using Easy Debian, inside LXDE the virtual keyboard should appear if you touch a text entry area. Javispedro tips concerns the language issue so all characters of the vkb work.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

Released v0.2.0 of Easy Chroot Harmattan. It adds the sbin directories to root $PATH of the image (the MeeGo $PATH of root is not changed).

So, when running inside the chrooted image, you can run, e.g., "apt-get update", "apt-get install", etc, without the need to manually add the "/sbin" and "/usr/sbin" directories.

It's because Maemo 4/5 root $PATH includes sbin directories, but MeeGo Harmattan root $PATH doesn't.

Re: [Announce] Easy Chroot package for MeeGo Harmattan
 

chrooting ubuntu to n9..ok i tried the desktop version... re-wrote it to .img but its not even seeing it yet...has anyone successfully done anything with this stuff?