Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Hello,

I have with me a new prototype HW 0521.

HW was build before S1.1 i already had.

OS, Thu dec 22 14:43:29 EET 2011.

One problem, when i turn ON device it stop at this screen,

http://hpics.li/891a9b2

I want to repair this system with windows 7 x86 pc.

Anybody can help me please?

nb. If you want rear picture of the device let me know.

Thanks.

EDIT: is the OS version rare (unknown by community) or already known?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Fixing MALF.

How to? With windows 7

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

upload some pictures of the device,is it in develope now or was?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

http://hpics.li/bd32a21

Nice no?

About OS, i will try to flash the proto with new harmattan system.
I try with success to MALF with ubuntu but device always freeze after screen.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Why on top there is a new hole btw power and usb?

What function?

Interesting...! Seem old revision have different hardware.

http://hpics.li/0867fa6

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

hwkb ? how different to E7 and N950 ?

RM-680 (dali) :

http://img15.hostingpics.net/pics/337609hole2.jpg

RM-680 (n950) :

http://mynokiablog.com/wp-content/up.../06/N950-C.jpg

RM-626 (e7) :

http://www.nokiamobile.hostei.com/im...icture-325.jpg

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I'd presume it's a dc jack?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

From the top to the bottom on the picture, the third hole exist on normal N950 or E7?

I have with me some prototypes devices but this hole doesn't exist.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

dc jack yes but why there is a dc jack and the most upper hole? like normal n950 or n9.

in conclusion we can say there is one hole in more than other n950.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Isn't the other hole for headphones?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Can you list the files ? does it mount ?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

One for headphone and other for jack but in others nokia n950 is there any dc jack?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I don't think so, I think it's just there because it was design or made right after the last N Series (N8 had it, don't know about E7). I think this might be one of the earliest N950 prototypes then..

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I have mounted all 3 parts but nothing rare inside.
I think its a fresh install corrupted.
is it better to reflash with last PR1.3?

thanks

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I have a problem now,

flasher -f -F PR1.3.bin

and here my error:

http://hpics.li/ff52aa2

how can i do?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

The 'bb5_rdc_cert_read failed' error?

Also, you could try the guide.

[Edit]
Oh, it may be that your file is corrupted aka unreadable.
[/Edit]

I have not met the error, yet.

Best wishes.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

My file isn't corupt.
I need to remove device Look ON and put OFF before flash but how can i do? what command line with flasher please

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

@rzr Actually rm-696 is the N9 (Lankku) and N950 (both prototype and developer device) is rm-680.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I try this command:

flasher -f -F pr13.bin --erase-user-data=secure (overnight... I hope so...)
How many hours if somebody tested it for full erase?

When it will be finished i will let you know.

thanks.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Hi,

Here is my error:

ubuntu@ubuntu:~$ sudo flasher -f -F /home/ubuntu/Téléchargements/13.bin --erase-user-data=secure
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 011.
Device identifier:
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8

Battery level 91 %, continuing.
Erasing, this may take a while.
ERROR: SU_BEGIN_ERASE_REQ terminated with error code 10: Security failure
Fetching error list:
========================================
bb5_esn_init failed
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bmeipc_open failed
Could not read battery level
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
ioctl(BLKSECDISCARD) failed for /tmp/sudmmcq8iCLG/internal0: Operation not supported
Erase successful but could not reset device lock


How can i do?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

other error,

sudo flasher -f -F /home/ubuntu/Téléchargements/13.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 001, device address 030.
Device identifier:
Found device RM-680, hardware revision 0521
NOLO version 2.0.21
Version of 'sw-release': DFL61_HARMATTAN_0.2011.11-5_RD_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 13942 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 001, device address 031.
Device identifier:
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_RM680
Image cert-sw not present for this HW (RM-680 rev. 0521)
Image xloader not present for this HW (RM-680 rev. 0521)
Image secondary not present for this HW (RM-680 rev. 0521)
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
ERROR: SU_GET_PARAMETER_REQ terminated with error code 7: Object not found
ERROR: Unable to get SU_PARAM_BATTERY_LEVEL
ERROR: Begin update failed
ERROR: Failed to flash images

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

First error you should read rainisto's advice: device lock can only be reset by full reflash (i.e. incl. eMMC).
But due to the second error I am concerned your HW revision is not (anymore) included in PR1.3. Which Whic, btw, I think is the worst method to get an early development device to life again, please try with the earliest firmware of N950 you are able to find (afaik publicly PR1.1).

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

It might be that your proto device is so different from the stock N9 hardware that it requires a different SW base package and cannot be flashed with Harmattan PR1.3

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Can you give me a link to download the earliest firmware please?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

How to flash with these exe files,
http://sourceforge.net/projects/n950fws/files/

When i run win OCF on windows 7 x86 doesn't work why?

Edit: ocf autoexec work now need to test it.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I try http://sourceforge.net/projects/n950...6.exe/download

http://hpics.li/cb77bba

Success.

But always freeze on this screen,

http://hpics.li/9f7d223

And after reboot looping...

Why?

I will test others.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

How to extract bin from OCF?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

With http://sourceforge.net/projects/n950...1.exe/download

http://hpics.li/58477d9

Not possible.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

http://sourceforge.net/projects/n950...6.exe/download


Not possible too.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

The only firmware works with flasher is OCF 22-6 but can't boot when turn on prototype.
Reboot all the time. Perhaps there is a solution to boot normally?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Is there an R&D mode for N9-00 prototype? It might switch off watchdogs, and thus prevent reboot loop.

Having reboot reason stated somewhere may help...

Best wishes.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

yes its possible to put on or off rd mode with prototype.
I will try and let you know.
what is the fonction of rd mode?
thanks

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Research&develop mode has several functions.

From N900, I remember those two:
1. Does not shutdown-reboot just because watchdog said so;
2. keyboard backlight is used as indicator of system status - for system notifications.

Actually... Wiki page

As far as I know, I do not have it enabled. It just came to my mind as the 'easiest' way to get rid of reboots... Since flashing-everything is not enough.

When you get to the filesystem, it would be helpful to find some kind of system logs which would state the reasons of reboots.

Best wishes.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

At least you found the FWs!

To extract the ocf image, just use 7zip.

22-6 is PR1.1 afair (without checking my safe ;))
I am not sure what one-click-flasher does but after extracting you will find some batch file(s) and it will reveal to you what it does. So probably it just flashes FW and you can use a manual full flash (with eMMC) and you are good to go ...

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

First i have tried to flash with 22-6.
After i tried all others versions.
And now i have problem to reflash with 22-6.
I will try to extract and flash with ubuntu with emmc.

I will let you know about my progress.

I hope it will be good.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Device is now with rd mode but same thing freeze at same screen. Why?

Full erase and updating SW release 22-6 success.

But freeze. How can i do now?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Actually, 22-6 is pre-PR 1.0 :).

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I boot with ubiboot.
I can have telnet so how can i do now?
http://hpics.li/2d8a0ad
http://hpics.li/c797057

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Yes, looks like it is not a malf problem but something else.

So, if you have not been able to flash the device, I assume it has the original content full in there, right?
First I'd take of course backups of all partitions, before attempting anything. Usually tar works best as dd'ing the devices will create so large images as to be unnecessary.
Then, I'd investigate what is the boot phase it hangs on, and for that the absolutely best tool is to enable serial console and monitor that when the device boots.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I have flashed the device. It's ok but now i want to pass screen freeze with nokia behind (check first picture).

how can i enable serial console and monitor?