help too many reboot
 

after transfer music files . n9 got too many reboots
product code 059j217
blutooth cannot turn off network wirless not work swap broken
by mistake flashed with 059L5D4 but same proplems:
sysuid not responding
swap broken
camera not responding
setting not responding
can anyone help????

Re: help too many reboot
 

How is this thread different from your earlier thread?

Here's the issue. You've yet to state what exactly have you done to get to this point. I know you want to downgrade for some reason in some other thread; however answer the following questions...

What device do you currently have?
What firmware have you flashed on the device?
What have you done since flashing a firmware on your device?
Have you tried to backtrack and go back to your original firmware?
What is your goal?

Let's start there. And let's actually spell out what you've done to get yourself into this position and how we can assist you to where your prior attempts are no longer creating issues.

Re: help too many reboot
 

i want solution to get back my device n9 work fine
it is same issue but no me one give me solution
i flashed with 670D5405_DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed
but same proplem,then flased with :
059L5D4_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed
and same proplem
when i try flashed with oreginal:
DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958_ARM
dowgrade error

Re: help too many reboot
 

???

VERY verbose and informative! :eek:

Obvious, as you are now on (Switzerland) country specific version.

Re: help too many reboot
 

what i have to do?
device not working properly
proplem software (mce) too many reboots

Re: help too many reboot
 

What country originally was your device? What country code?

Re: help too many reboot
 

original code 059J217

Re: help too many reboot
 

And you thought flashing 059L5D4 was a smart move?

Since you've upgraded to PR1.3, you're stuck there. And after looking around quickly, seems like 059J217 is actually hard to find in V40.2012.21-3.

I'll keep looking. That will be what you will have to flash everything to get back to where you need to be instead of flashing random **** like before...

Re: help too many reboot
 

Nope, he is stuck/bound on 480 (Switzerland, nice one I use since years ;)).

He should post here verbosely all steps with all command lines he did (especially the last ones) and with all ouput/error messages ...

Else no one can miraculously guess what is going on.

command to execute:
flasher -f -F main.bin -F eMMC.bin
if after this command (with no errors during flash) the device still behaves badly (and I still have no clue what he means with that) then I assume a HW failure...

Re: help too many reboot
 

do you mean this:
DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958_ARM

Re: help too many reboot
 

No. I do not. That's a vanilla file - no variant. You require the 059J217 variant. Do not flash anything else until you read the following...

Peterleinchen actually has the best idea. Explain each and every step that you've done, clearly, with all of the commands listed out and the files that you used.

These files are unfortunately not as interchangeable as we'd like. Worse yet, they're getting harder to find unfortunately.

Answer the above, be detailed. That way we can help you. Otherwise, you might have a dead device on your hands and it's because of your choices.

Re: help too many reboot
 

while i transfer music ringtons cross blutooth,after done i leaved device on charge on morning my device stuck :blutooth cannot tufn off network wiless no appear device always flight mode when i try swap device reboot
(too many reboot device not working properly)
but when i choose usb mass storage not reboot and swap work but blutooth not ,network not appear
firstly i flashed with:
flasher -f -F 670D5405_DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
but same prplems
then i flashed with :

flasher -f -F 059L5D4_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
same proplems i tried flashed with main and emmc for switzeland:

flasher -f -F 059L5D4_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin -DFL61_HARMATTAN_40.2012.13-7.SEAP_EMMC_SEAP.bin
but flasher not work