maemo.org - Talk
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)
-   -   Sailfish OS 3.2 for early Adaptor (https://talk.maemo.org/showthread.php?t=100865)

chilango 2019-10-29 15:30
Sailfish OS 3.2 for early Adaptor
 
Coderus announced 3.2.0.12

No VoIP improvement :(

Bundyo 2019-10-29 17:05
Re: Sailfish OS 3.2 for early Adaptor
 
Adopter != Adaptor :)

Also Jolla announced it.

And again no Qt 5.9.

atlochowski 2019-10-29 17:29
Re: Sailfish OS 3.2 for early Adaptor
 
Quote:
Originally Posted by Bundyo (Post 1561310)
Adopter != Adaptor :)

Also Jolla announced it.

And again no Qt 5.9.
it is posponed to next year

Bundyo 2019-10-29 17:37
Re: Sailfish OS 3.2 for early Adaptor
 
Not that I'm surprised. :)

chilango 2019-10-29 19:39
Re: Sailfish OS 3.2 for early Adaptor
 
How many time we heard "soon"
VoIP I'am waiting since my beloved Jolla 1.
Now i'am on the XA2. It will be the last.
I'am still using my N9 traveling why there, i connect the phone with my Fritzbox with integrated Sip-Server and make calls wordwide for near free charges

pichlo 2019-10-30 08:37
Re: Sailfish OS 3.2 for early Adaptor
 
I got a popup last night on both my devices.

The first impression: Patchmanager is totally broken.

atlochowski 2019-10-30 09:11
Re: Sailfish OS 3.2 for early Adaptor
 
Quote:
Originally Posted by pichlo (Post 1561344)
I got a popup last night on both my devices.

The first impression: Patchmanager is totally broken.
No, not totally. You can apply patches but not by by pulley menu (it's broken).
You should open pulley menu at the main screen of Patchmanager and choose "load engine" after that if you tap on dot next to the patch you will enable it.

I have reported that to Coderus.

tmi 2019-10-30 12:53
Re: Sailfish OS 3.2 for early Adaptor
 
It finally happened: the upgrade messed my J1... a good run though, almost 6 years.

The upgrade couldn't complete, told to reboot. I suspected something might go awry and lo&behold: grey screen.
There was enough space, no patches, yadda-yadda but the upgrade went nuts all the same. Tried with btrfs repair but didn't help. No biggie, was more of a toy nowadays.

After factory reset started to upgrade way back from 1.0.0.5 (it was nice to see SFOS 1 silica for a change :)) through the stop releases and got as far as 2.2.0.29 but then the upgrade to 3.0.0.8 refused to co-operate several times. Have to give it another look later... I'd hate to start all over again so maybe some of this helps.

EDIT: Success. First nothing seemed to help, but going through all the clean ups +
Code:
ssu re 2.2.0.29
pkcon refresh
pkcon update
reboot
and I was finally able to upgrade succesfully first to 3.0.0.8 and in the end to 3.2.0.12.

Bundyo 2019-10-30 19:04
Re: Sailfish OS 3.2 for early Adaptor
 
Quote:
Originally Posted by atlochowski (Post 1561348)
No, not totally. You can apply patches but not by by pulley menu (it's broken).
You should open pulley menu at the main screen of Patchmanager and choose "load engine" after that if you tap on dot next to the patch you will enable it.

I have reported that to Coderus.
Are we talking about Patchmanager 3, as it is totally working?

atlochowski 2019-10-30 20:41
Re: Sailfish OS 3.2 for early Adaptor
 
Quote:
Originally Posted by Bundyo (Post 1561360)
Are we talking about Patchmanager 3, as it is totally working?
yes, about Patchmanager 3.
I'm using 'upcoming events on lockscreen' patch with Patchmanager 3 and SailfishOS 3.2.0.12


All times are GMT. The time now is 07:11.
Page 1 of 6 1 23 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8