Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

What a wonderful day to test "maemo-leste-1.0-armhf-droid4-20200112.img.xz".
But after choosing "Maemo Leste" on KEXECBOOT, the screen stays black and no boot status or GUI is shown :eek:

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

still cannot boot? try with plug in charge cable.

or re burn the image

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

1) USB cable pluged in charger: black screen :(
2) USB cable pluged in computer: no usb network (https://leste.maemo.org/Status/USB_Peripheral) :(
3) New microSD Card with maemo-leste 01-2020: black screen :(
4) New microSD Card with maemo-leste 02-2019: booting :D
5) wget https://maedevu.maemo.org/testing-key.asc :D
6) apt-key add testing-key.asc :D
7) sudo /etc/expandcard.sh :D
8) sudo apt-get update :D
9) sudo apt-get dist-upgrade :D
10) on some point during dist-upgrade, screen goes black and game over :(

Status today:
02-2019 - OS is o.k. but old
01-2020 - black screen and no usb-network

:confused::confused::confused::confused:

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

Please add some feedback here - https://github.com/maemo-leste/bugtracker/issues/302

Or file a new issue, would like to help.

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

can you show me what the debug info? in kexectboot selecet system menu -> show debug info

and go to mmcblk0p1 and mmcblk0p2 (on the bottom)

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

Found device '/dev/mmcblk0p1' (179, 97) of size 128Mb
* creating device node
* FS type 'ext2' detected
* config file found

Found device '/dev/mmcblk0p2' (179, 98) of size 29730Mb
* creating device node
* FS type 'ext4' detected
* can't open config file: No such file or directory
* no config file nor any kernels found

Hope this helps? Thanks, druk13

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

sorry been a while off hehe, I think you did not follow the installation guide exactly

because by default mmcblk0p2 is only 1 or maybe 2Gb size (it's the rootfs of maemo-leste)

and based on your reports it's the rest of your sdcard. i assume you are using 32Gb sdcard right?

try read the guide slowly and try to understand. or maybe you can use etcher. (the alternate way)

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

I have same problem new image cant boot but old image success, i flash with etcher , any hint on motorola droid 4 , tq all

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

Maybe this will help:

https://github.com/maemo-leste/bugtracker/issues/270

Can you explain what is not working for you exactly?

Re: Motorola Droid 4 - Problem with "maemo-leste-1.0-armhf-droid4-20200112.img.xz"
 

oh ok thank for feedback last nite i try with newer image droidkexec boot after that is normal booting , and i really impressive it s like n900 upgrade everything so fast and smooth , thank u for ur effort