maemo.org - Talk - Can't flash N9

maemo.org - Talk (https://talk.maemo.org/index.php)

- MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)

- - Can't flash N9 (https://talk.maemo.org/showthread.php?t=101207)

I bought two N9s, both with Device not working properly error. I fixed first by flashing one file: A0E9827F_DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
But second, I can't flash. Error: https://pastebin.com/wdBbq1CJ
Any solutions?

Re: Can't flash N9

Not got a solution for you yet, but can you tell me which of the two N9 you managed to fix from your previous posting "First is stopping on Nokia logo, second is showing error Device not working properly"?

Re: Can't flash N9

OK. I will tell you exactly what these Nokia phones have, what mistakes they have and their history.
1. First I bought (a few months ago) N9, which hangs on the NOKIA logo.
I could not fix it (currently it has a similar bug as in the topic, but with a different version of the software).
2. Then, at ONE auction, I bought two Nokia phones,with error Device not working properly. I fixed the first one with a successful flash, while the second one failed - and this is what this topic is about.
3. The last one I bought a blue N9, it turned out that it was from China and it was hanging on the NOKIA logo. I flashed it with the 009 soft (it was), and the process of flashing cmt-mcusw was suspended. Then I have flash-only = cmt 003, and it works great: D
So topic is about:

Quote:

while the second one failed - and this is what this topic is about.

Bye :)

Re: Can't flash N9

Your second one is busted.
just search on this very forum for your error code
bb5_rdc_cert_read_failed

You bought a brick. I do hope you did not spent too much?

You might once try old flash, param -c, but I am sure outcome is the same.

Re: Can't flash N9

There is no SURE solution? This error is so dusty :mad::(

Re: Can't flash N9

New log:

Code:

sudo flasher -f -F A0E9827F_DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin

flasher 3.12.1 (Oct  5 2011) Harmattan

WARNING: This tool is intended for professional use only. Using it may result

in permanently damaging your device or losing the warranty.



Suitable USB interface (bootloader/phonet) not found, waiting...

USB device found at bus 002, device address 049.

Device identifier: 357923041182611 (SN: N/A)

Found device RM-696, hardware revision 1507

NOLO version 2.3.6

Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.339.2_PR_339

Sending ape-algo image (7103 kB)...

100% (7103 of 7103 kB, avg. 38395 kB/s)

Suitable USB interface (phonet) not found, waiting...

USB device found at bus 002, device address 050.

Device identifier: 357923041182611 (SN: N/A)

Raw data transfer EP found at EP2.

Ping attempt 1 (250 ms)

Server application: 1.7.2

Found product RM-696 rev. 1507

Server implements softupd protocol version 1.8

Image SW version DFL61_HARMATTAN_40.2012.21-3.339.2_PR_339

Image moslo not present

Image mmc not present

Image tar skipped

Image config skipped



Battery level 89 %, continuing.



    image        [state    progress         transfer     flash speed]

---------------------------------------------------------------------

[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]

[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]

[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]

[_] cmt-mcusw    [finishing   25 %    6050 /    6050 kB    3075 kB/s]

[x] xloader      [finished   100 %      23 /      23 kB      NA     ]

[x] secondary    [finished   100 %      94 /      94 kB      NA     ]

[x] kernel       [finished   100 %    2714 /    2714 kB    1931 kB/s]

[_] rootfs       [finishing  100 %   32768 / 1170221 kB      NA     ]

ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error



    image        [state    progress         transfer     flash speed]

---------------------------------------------------------------------

[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]

[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]

[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]

[x] cmt-mcusw    [finished   100 %    6050 /    6050 kB    3075 kB/s]

[x] xloader      [finished   100 %      23 /      23 kB      NA     ]

[x] secondary    [finished   100 %      94 /      94 kB      NA     ]

[x] kernel       [finished   100 %    2714 /    2714 kB    1931 kB/s]

[f] rootfs       [finishing    0 %   32768 / 1170221 kB      NA     ]

Fetching error list:

========================================

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

bb5_rdc_cert_read failed

mmc: sfdisk returned status 1

mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcr5U3lb/internal0p2'

mmc: Could not remove mount directory /tmp/sudmmcr5U3lb/mnt: No such file or directory

[Pipe   4] Finishing in error state with status 1

========================================



ERROR: Failed to flash images

Still the same...

Re: Can't flash N9

Seems exactly the same issue as in this thread to which unfortunately there was no solution as seems HW issue on flash memory:
https://talk.maemo.org/showpost.php?...5&postcount=28