770 host mode - need help
 

Hello. I know there are many threads about this particular subject but I haven't been able to find any solution.....
I have a nokia 770 in host mode via the flasher utility, a soldered-myself usb y cable, and a usb hub powered by a charger. Bottom line is, conncting my usb keyboard doesn't work and I don't know how to mount an usb stick ( tried with sda1,2 and sdb 1,2 no luck).
dmesg output:
[ 927.570312] omapfb_notifier_cb(): event = READY
[ 960.232360] tahvo: Registering interrupt 2 for device
[ 960.415954] aic23 powering up
[ 960.420349] aic23_init_power() done
[ 963.866363] aic23 powering down
[ 1019.996337] hwa742: setting update mode to disabled
[ 1019.996398] omapfb_notifier_cb(): event = DISABLED
[ 1030.000335] USB cable connected
[ 1030.022155] hwa742: setting update mode to manual
[ 1030.022216] omapfb_notifier_cb(): event = READY
[ 1030.533172] usb 1-1: new full speed USB device using ohci and address 6
[ 1030.753723] usb 1-1: device descriptor read/64, error -110
[ 1031.084625] usb 1-1: device descriptor read/64, error -110
[ 1031.424194] usb 1-1: new full speed USB device using ohci and address 7
[ 1031.662658] usb 1-1: device descriptor read/64, error -110
[ 1031.985748] usb 1-1: device descriptor read/64, error -110
[ 1032.300384] usb 1-1: new full speed USB device using ohci and address 8
[ 1032.750274] usb 1-1: device not accepting address 8, error -110
[ 1032.947143] usb 1-1: new full speed USB device using ohci and address 9
[ 1033.405395] usb 1-1: device not accepting address 9, error -110
[ 1048.477294] aic23 powering up
[ 1048.481964] aic23_init_power() done
[ 1051.530456] aic23 powering down



I attached a (clumsy) drawing of my cable....one end in the 770, one in a hub port for power, the other fow data coming from the hub.

http://i29.photobucket.com/albums/c265/ymaginary/s2.jpg
can anyone help? thanx in advance

Re: 770 host mode - need help
 

Are you connecting the data lines to the hub? the keyboard needs power and data and the 770 needs power and data from the usb line, however the hub (or whatever is giving it power) needs to only be connected to the power lines, not data.

Re: 770 host mode - need help
 

well, the keyboard is getting power from the hub which externally powered, the 770 is powered with the y cable ( the end which comes into the hub), and the 2 data lines go from the hub to the 770. That's my design, seeme is isn't working though

Re: 770 host mode - need help
 

The power lines have to be common between the 770, the other device and whatever is giving the power. The data lines have to go only between the 770 and the device.

Re: 770 host mode - need help
 

10x for the advice. resoldered the y cable so I could ditch the usb hub, and it works. adding the hub still isn't working, think i found my problem. seems strange, cause the hub works fine with the pc

mrlanrat have you found a way to automount that hd?