Bubbles beneath the screen protector-Invisible Shield
 

Hi, I recently got my invisible shield screen protector and followed all the steps. Then when I put it on, I found quite a lot of bubbles (6 or 7). Is this normal? If I leave the n800 out overnight will the bubles clear up? And how long should I wait to turn on my scratchless baby (who would scratch a baby?)

Re: Bubbles beneath the screen protector-Invisible Shield
 

I've used the product many times on items like gpsr's, phones, pda's, etc. Sometimes it takes 2-3 days for the shield to be fully clear from bubbles. Directions say to wait 24 hrs. before using the device.

Re: Bubbles beneath the screen protector-Invisible Shield
 

kk, thx for the quick response. Glad to know it worked for someone. :)

Re: Bubbles beneath the screen protector-Invisible Shield
 

I'm using another brand of screen protector but bubbles always cleared up after a few days. The device could be used normally during this time.

Re: Bubbles beneath the screen protector-Invisible Shield
 

I use the Invisible Shield and found that all the bubbles miraculously disappeared within a couple of days. I also found that the shield was too "grippy" on the stylus at first but that has cleared up, too.

Re: Bubbles beneath the screen protector-Invisible Shield
 

I officially hate invisible shield. It turns out the bubble under the screen weren't air bubbles, they were liquid bubbles. So when I put the solution on the screen protector, some of it got stuck under the screen. Looks like I'm going to have to buy another screen protector! :mad:

Re: Bubbles beneath the screen protector-Invisible Shield
 

squeegee 'em out

Re: Bubbles beneath the screen protector-Invisible Shield
 

Liquid bubbles, like air bubbles, will (read: should) disappear. But, yeah, you were supposed to squeegee it out. Liquid/air bubbles > dust bubbles.

Re: Bubbles beneath the screen protector-Invisible Shield
 

Careful with the squeezing, it's very easy to squeeze too much. Symptom is that the digitizer stops working (=stylus not working), cure is to carefully rip the screen protector off (which will lift the screen enough to fix the squeezed digitizer).

Re: Bubbles beneath the screen protector-Invisible Shield
 

i got bubbles on the screen protector that ships with the product...
at first i thought i had a couple of dead pixels...but it was just the bubbles!