WPA Enterprise
 

We have a "WPA2 Enterprise" wireless network at work. My cube-mate is able to connect his iPod Touch by just clicking on "WPA Enterprise". On the N800/Diablo I have been struggling to connect and it does not connect. I tried the instruction below from different thread but no luck:

page 1: Connection type = WLAN
page 2: Network mode = Infrastructure; Security method = WPA with EAP
page 3: EAP type = PEAP
page 4: Select certificate = None; EAP method = EAP MSCHAPv2
page 5: You can enter your login information if you don't want to log in manually each time
page 6: Click "Advanced" button
Other tab: Enable "WPA2-only mode"
EAP tab: Enable "Use manual user name"; enter your "Manual...

Could it be that N800/Diablo is missing support for WPA2 Enterprise?

-rd

Re: WPA Enterprise
 

Me have the same problem with WPA/PEAP in windows domain after bora (with bora it worked). I thnk I tried all posibilities to put the user/domain and pass to config the connexion and it didn't work.

Had anyone success with EAP-MSCHAPv2 (WPA or WPA2)?

Re: WPA Enterprise
 

I've used TTLS/MSCHAPv2 without too much problems.

Note that NO WPA-Enterprise connections will auto-associate like every other type of network

https://bugs.maemo.org/show_bug.cgi?id=3399

here is another WPA bug

https://bugs.maemo.org/show_bug.cgi?id=417

All bugs that mention WPA2

https://bugs.maemo.org/buglist.cgi?quicksearch=WPA2

Re: WPA Enterprise
 

I can not connect to my WPA2 networking in my working place too. Even they said we will have our own wireless in lab, but I still hope I can setup WPA2 will, since it works in almost all around the campus.