maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N810 (https://talk.maemo.org/forumdisplay.php?f=28)
-   -   Bricked n810 (https://talk.maemo.org/showthread.php?t=27877)

trekkie711 2009-03-27 06:01

Bricked n810
 
Its a sad day. My n810 appears to be bricked. When one turns it on the white screen w/ nokia logo in the center instanly appears, then never leaves, and its impossible to trun it off. Also, when its off and one plugs it in the same screen comes up, no battery charging logo. Ive tried to flash it from my windows pc, when its pluged into usb and is turned on the usb logo in the top right appears, however does not last more than a seccond or two, and the pc just reconizes it before it dissconnects. any ideas?
- thanks!

icebox 2009-03-27 06:46

Re: Bricked n810
 
I would eject any cards that might be in, leave the battery out for a few minutes put it back and try again flashing it. Maybe try a different battery if you have one?

generationally 2009-03-27 07:19

Re: Bricked n810
 
I think I have experienced something similar on a couple of occasions. Now, I'm not sure of this but when it happened to me I think that the battery was completely flat.

Also I'm not sure what actually solved the issue but I seem to remember that I first took the battery off and then put the battery back on again.

Then I just plugged in the charger and left it like that. At this point there is no indication that the device is charging as you also describe but I believe the battery is being charged and it will again be possible to turn it on as usual after an hour or two. At least this is how I remember it :-)

fanoush 2009-03-27 07:59

Re: Bricked n810
 
Quote:

Originally Posted by trekkie711 (Post 275015)
Ive tried to flash it from my windows pc, when its pluged into usb and is turned on the usb logo in the top right appears, however does not last more than a seccond or two, and the pc just reconizes it before it dissconnects. any ideas?
- thanks!

when tablet is off plug USB in, hold the swap button, plug power in (device powers on), wait for usb icon, release swap button (the one below camera)

holding swap button when powered on means that it waits indefinitely in usb logo, not just ~2 seconds

Z4CHH 2009-03-28 00:47

Re: Bricked n810
 
Quote:

Originally Posted by trekkie711 (Post 275015)
Ive tried to flash it from my windows pc, when its pluged into usb and is turned on the usb logo in the top right appears, however does not last more than a seccond or two, and the pc just reconizes it before it dissconnects. any ideas?
- thanks!

I don't know about Windows, but with my Linux machines I'd plug in the USB then check the dmesg logs (e.g. "$ dmesg | tail"). This may help explain what's going on when it connects to your machine via usb.

trekkie711 2009-03-28 22:54

Re: Bricked n810
 
Thanks to all for the quick reply! fanoush esp, it was the swap button that did it, now ive got it reflashed and all is well


All times are GMT. The time now is 06:36.

vBulletin® Version 3.8.8