Mer 0.17testing4 on N900 HOWTO
 

I have installed and have booted up and running Mer 0.17testing4 on my Nokia N900.

Something somewhat like a HOWTO is available here:

http://wiki.maemo.org/User:Jebba/Mer


Have fun. :)

Re: Mer 0.17testing4 on N900 HOWTO
 

Thanks! Very nice job!

One thing that should be mentioned here is that (apparently) this can be done without reflashing or wiping your main N900 operating system! That should get a few people testing it!

Very fine contribution jebba!

Re: Mer 0.17testing4 on N900 HOWTO
 

Nice job! How do I set the calendar. I can't get past the screen

Re: Mer 0.17testing4 on N900 HOWTO
 

There's two prompts, first asks you for the date, the second for the time (IIRC). Is that what you are talking about? If so, just hit "OK" button. That may seem like a simple answer, but it's what I do. Or perhaps you need to explain more fully what your problem is. I'm just putting whatever time right now too...

Re: Mer 0.17testing4 on N900 HOWTO
 

If you hit this and a few lines about ipv6ish stuff, it's cuz you didn't copy over the proprietary /lib/firmware/* to Mer. Gah, nonfree. :(

Re: Mer 0.17testing4 on N900 HOWTO
 

This looks like a great option for the future, but it is a bit too early for me to try. They need at least to have phone call support first, then I will take it for a whirl.

Re: Mer 0.17testing4 on N900 HOWTO
 

Thanks, I was able to get through everything.

Re: Mer 0.17testing4 on N900 HOWTO
 

Now with charging (took a little too much voodoo for my taste)

carsten@carsten-tablet:/mnt/initfs$ hal-device bme
udi = '/org/freedesktop/Hal/devices/bme'
battery.rechargeable.is_charging = true (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.design = 1267 (0x4f3) (int)
battery.reporting.unit = 'mAh' (string)
battery.reporting.current = 853 (0x355) (int)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
battery.voltage.design = 4200 (0x1068) (int)
battery.voltage.unit = 'mV' (string)
battery.reporting.last_full = 0 (0x0) (int)
battery.voltage.current = 3819 (0xeeb) (int)
info.addons = { 'hald-addon-bme' } (string list)
info.capabilities = { 'battery' } (string list)
battery.remaining_time.calculate_per_time = false (bool)
info.category = 'battery' (string)
maemo.charger.type = 'wall charger' (string)
info.subsystem = 'unknown' (string)
info.product = 'Battery (BME-HAL)' (string)
info.udi = '/org/freedesktop/Hal/devices/bme' (string)
maemo.charger.connection_status = 'connected' (string)
maemo.rechargeable.charging_status = 'on' (string)
battery.present = true (bool)
battery.type = 'pda' (string)
battery.is_rechargeable = true (bool)
battery.remaining_time = 7200 (0x1c20) (int)
battery.charge_level.capacity_state = 'ok' (string)
battery.charge_level.unit = 'bars' (string)
battery.charge_level.design = 8 (0x8) (int)
battery.charge_level.current = 6 (0x6) (int)
battery.charge_level.percentage = 67 (0x43) (int)
battery.charge_level.last_full = 0 (0x0) (int)

Re: Mer 0.17testing4 on N900 HOWTO
 

Just blogged about battery, RTC and watchdogs:

http://mer-project.blogspot.com/2010...rging-and.html