[Announce] OpenConnect (-GUI) VPN client
 

Hi all,

I would like to announce a new application (well actually two), available in extras-devel.

First of all: OpenConnect, a free implementation of Cisco's AnyConnect SSL VPN, which is supported by IOS 12.4(9)T or later on Cisco SR500, 870, 880, 1800, 2800, 3800, 7200 Series and Cisco 7301 Routers.

Please note that this client cannot connect to the same VPN servers as vpnc does: those VPN concentrators use a different technology!

The original webpage for OpenConnect: http://www.infradead.org/openconnect.html
This is essentially a straight port from the original source, plus some modifications for maemo.
OpenConnect is available for Fremantle and Diablo.

The second application is OpenConnect-GUI, which is a front-end for OpenConnect (similar to vpnc-gui, from which it takes inspiration for GUI).
OpenConnect-GUI is available only in Fremantle for the moment.

Please report back for any suggestion/bug report (bugs can be reported in maemo's bugzilla).
And if someone wants to design a better looking icon, be my guest! I really suck at graphics :)

Before installing anything from extras-devel, please be sure to read the following warnings:
http://talk.maemo.org/showpost.php?p=343619&postcount=1

A screenshot of OpenConnect-GUI:

http://imgur.com/TMn54l.png

Re: [Announce] OpenConnect (-GUI) VPN client
 

Reallllly want to ty this out - but extras devel will bite my ankles off i hear... so i'll let Kathy go first :) (Such a gentleman!)

Can't wait to hear what it is like and see it in extras :)

Re: [Announce] OpenConnect (-GUI) VPN client
 

A real gentleman ;)

The only problem I see with that kind of application (and the testing of such application) is the fact that Cisco VPN/SSL concentrators are not that common, so it may take quite a while to get the application tested correctly (if at all).

Unfortunately I cannot offer temporary VPN accesses to test, so this application may be condemned to remain eternally in extras-devel (or extras-testing)

Re: [Announce] OpenConnect (-GUI) VPN client
 

Well i gave up waiting and took the leap....
Installs fine! - and i'm struggling at this point - as i think my Cisco VPN (Juniper/stylee) will not work with open connect. :(

But i have to say, looks slick, can edit settings fine :)

Re: [Announce] OpenConnect (-GUI) VPN client
 

If you don't promote it to extras-testing it won't be tested for sure. But apparently you believe that it works and want people to use it (otherwise there you wouldn't have announced it), so please promote it to extras-testing.

Re: [Announce] OpenConnect (-GUI) VPN client
 

That's a good point. I've promoted it to extras-testing

Re: [Announce] OpenConnect (-GUI) VPN client
 

Any way to add "group" to settings ? I need to select a group for exp. "student" for my university wlan.

Re: [Announce] OpenConnect (-GUI) VPN client
 

I have the same question - currently looking at Vpnc and this :| - hopefully one will work!

Re: [Announce] OpenConnect (-GUI) VPN client
 

In the present version it's not possible to add the group setting. I did not include it, since I didn't need it, but I will gladly add this option in the next release (shouldn't be that far away, and it's a straightforward addition).

What I want to point out however, is that vpnc and openconnect are not interchangeable!

vpnc works with the the Cisco VPN concentrator 3000 Series, Cisco PIX appliances and Juniper/Netscreen, by using IKE/IPSEC

openconnect works with other Cisco concentrators (see the top post of this thread), and uses SSL.

Re: [Announce] OpenConnect (-GUI) VPN client
 

I would really like the group choice added.

I'm the administrator of Cisco ASA5510 so I would be able to help debugging if needed. :-)