![]() |
N900 not identifyling my USB2
I plug the N900 in and I get a (Windows XP) balloon in the taskbar telling me "This device works better when connected to a USB2 port - click here for a list of available ports".
Well, I don't even think my PC has any USB1 ports. I've never gotten a notice like this before with any USB device. I did try to plug the unit into both the back and front USB ports, and got the same message each time. I'm not even sure if the data is moving at USB1 or 2 speeds. I kind of feel the transfer is slower than on other devices? But I don't have that much to compare it to, other than external HDD's, and I've always felt that SD RAM loads slower than platter drives. Is this "not finding a USB2 port" a known bug, or perhaps something unique to my system? Or maybe I haven't installed USB support for my N900 correctly? Thanks for the help. |
Re: N900 not identifyling my USB2
You can ignore the "USB 2.0" warning; it's boilerplate and not relevant to the issue.
The problem for me seemed to be on the Windows XP side. The solution was rebooting the N900 (disconnected from cable), inserting the usb cable into the N900 first, then inserting into the PC-- and waiting. It took XP a while to find the USB driver and fully install the device; if I tried to access it too soon I received the error you get. |
Re: N900 not identifyling my USB2
So are you saying if I follow the procedure you describe the warning will cease? Or wil it persist and is just to be ignored?
|
Re: N900 not identifyling my USB2
In my experience, I only see the warning if the USB cable is plugged in when the n900 screen is off. If I connect the USB cable when the n900 screen is active, there is no warning message.
|
Re: N900 not identifyling my USB2
Quote:
|
All times are GMT. The time now is 21:43. |
vBulletin® Version 3.8.8