maemo.org - Talk
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Games (https://talk.maemo.org/forumdisplay.php?f=12)
-   -   ioquake3 update (https://talk.maemo.org/showthread.php?t=47178)

jamesla 2010-03-12 02:40
ioquake3 update
 
Hey guys I updated to the newest version of ioquake3 and now it wont run, it just opens a black screen for about 5 seconds and closes back to the desktop. Does anybody know what the update has done or how to fix this?

Patola 2010-03-12 03:01
Re: ioquake3 update
 
ioquake3 1558-maemo6 worked wonderfully here.

The only change I noticed is that autoaim is not enabled.

F2thaK 2010-03-12 03:03
Re: ioquake3 update
 
Quote:
Originally Posted by Patola (Post 564597)
ioquake3 1558-maemo6 worked wonderfully here.

The only change I noticed is that autoaim is not enabled.
ive updated but not tested... autoaim is off?? i found how to disable it for previous version..

Siddarth 2010-03-12 06:42
Re: ioquake3 update
 
Quote:
Originally Posted by jamesla (Post 564585)
Hey guys I updated to the newest version of ioquake3 and now it wont run, it just opens a black screen for about 5 seconds and closes back to the desktop. Does anybody know what the update has done or how to fix this?
Mine didnt start even before uppdate.....after update too...i have the same problem!

Fötus 2010-03-12 07:14
Re: ioquake3 update
 
Quote:
Originally Posted by f2thak (Post 564599)
ive updated but not tested... autoaim is off?? i found how to disable it for previous version..
How did you disable it in the previous version?

F2thaK 2010-03-12 08:04
Re: ioquake3 update
 
DISABLE AUTOAIM:


in file /home/user/baseq3/autoexec.cfg

at the bottom, change the section shown below

set the numbers (default: 1) to 0 (zero)

Code:
set aim 0
//set shoot 0

---


DISABLE ACCELEROMETER:


in file /home/user/.q3a/baseq3/q3config.cfg

at the bottom, change the section shown below

set the numbers for both "seta accel_epsilon_#" (default: 100) to 9999 as shown:

(do the same with "seta accel_jump" to disable jump)

Code:
seta accel_jump "-1300"
seta accel_epsilon_x "9999"
seta accel_epsilon_y "9999"

rikisky 2010-03-13 01:17
Re: ioquake3 update
 
ioquake 3 never worked for me :( it opens then immediately shuts down, i use Open Arena, but there's a world in the 2nd level that makes my N900 freeze and i have to reset.... i never understood why there are 2 versions of the same game.... anyone cares enough to explain pl0x? :) ... i only assumed one would be an online multiplayer version but not sure :(...

F2thaK 2010-03-13 04:04
Re: ioquake3 update
 
with ioquake3, you need the original game. copy the pak files to:

/home/user/.q3a/baseq3/

you need to copy the 9 pak files. pak0.pak --> pak8.pak




why 2 versions??


ioquake3, like I said, you need the orignal game. so in other words its copyrighted.

openarena uses the free (open source) part and makes the rest themselves...
skins, maps....

jamesla 2010-03-15 04:21
Re: ioquake3 update
 
The error is when running q3.sh through terminal - recursive error after: User Interface is version 3, expected 6

quake 3 worked fine before installing this update

~phoenix~ 2010-03-15 05:22
Re: ioquake3 update
 
hmm.... install the ioquake-maemo5 version and not the newest ioquake-maemo6.... that solved the problem for me....


All times are GMT. The time now is 21:02.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8