![]() |
Bricked N900 - can anyone help?
Spent way too much time trying to fix this today.
Switched off my N900 earlier today and went I switched it on it wouldn't boot. Shows the Nokia splash then 5 dots for a few seconds. Discovered the flasher program and put it in R&D mode. At boot time it says: No initfs \o/ Not sure if this is an error or an informational warning, as I later read that initfs is not used on N900. Tried to flash the initfs but got a message about usb bulk write failing after 0 bytes. Tried to flash the whole thing - a warm flash succeeded, but the N900 still wouldn't boot. Interestingly the full flash does not include initfs. Tried a cold flash, but never got that to work - sits there saying: Suitable USB device not found, waiting. Think it's going back to the shop tomorrow for a replacement, but I was desperately trying to get my current one working as I didn't want to have to reconfigure everything, install apps etc. Failed miserably. Any ideas? Did I miss something obvious? I must say, the whole flash process is not particularly intuitive. I read a lot of forums before I got it to work, and I'm still not sure why the cold flash didn't work. |
Re: Bricked N900 - can anyone help?
flash the EMMC and then do firmware flash might work but you will lose data on MyDocs
|
Re: Bricked N900 - can anyone help?
I'm not worried about MyDocs - I have already managed to copy the contents via USB. I have probably already lost my other configs and applications though. :mad:
Do you really think this might work? |
Re: Bricked N900 - can anyone help?
Thanks for the suggestion. Errr, it worked !!
|
Re: Bricked N900 - can anyone help?
i have same problem ,
but i dont want lose data on Mydocs, is thr any alternative??:mad::mad::confused::confused::confus ed: |
Re: Bricked N900 - can anyone help?
[IMG]file:///home/ubuntu/Desktop/Screenshot.png[/IMG]
|
Re: Bricked N900 - can anyone help?
No such thing as a "BRICKED" N900 unless it has sustained physical component damage.
|
Re: Bricked N900 - can anyone help?
Quote:
You can access the whole contents of the eMMC to rescue your data by following the guide here to boot the Meego rescue kernel. You'll need to do this from a linux computer but you don't need to install linux, you can just boot a linux live cd/usb or probably even use a VM. |
Re: Bricked N900 - can anyone help?
Quote:
|
Re: Bricked N900 - can anyone help?
even then a cold flash might work.
|
All times are GMT. The time now is 08:40. |
vBulletin® Version 3.8.8