Overclocking n900 900mhz. Error. Need some hand
 

Hey guys. Need some little help.

Soon after i hit flasher-3.5 -k zImage-600mhz -f -R

I get below details.

USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8.002_PR_002
Sending kernel image (109 kB)...
100% (109 of 109 kB, avg. 15571 kB/s)
Flashing kernel... done.

Everything complete done. But as soon as i switch my n900 its like can't pass the nokia screen.

I have to reflash it with "flasher-3.5.exe -F RX-51_2009SE_3.2010.02-8.002_PR_COMBINED_002_ARM.bin -f -R" to open back.


How do i overclock it. ? i test it alot of time. same issue.

Re: Overclocking n900 900mhz. Error. Need some hand
 

If the custom kernel was in a zipped folder, did you unzip it? Once, I accidentally flashed my N900 with a .Zip folder lol and I didn't get past the Nokia splash screen.

Re: Overclocking n900 900mhz. Error. Need some hand
 

Is it plugged ino the charger? I have had issues with using the phone and the charger being in it while powering up. It looks as if you did everything correct. I rename all my files like first update usa1.bin, or global1.bin or 900500.bin just to make it easy. Maybe do the flash line and take of the -R switch when trying to flash the overclock. Then unplug it then take out battery and restart it yourself. Maybe that might help.

Re: Overclocking n900 900mhz. Error. Need some hand
 

ive tried to overclock my phone using this link http://mymaemo.com/download/900-mhz-...n900-1026.html so far its ok works like a charm :)

Re: Overclocking n900 900mhz. Error. Need some hand
 

whats root not found mean?

Re: Overclocking n900 900mhz. Error. Need some hand
 

You probably haven't installed rootsh which is needed.

Re: Overclocking n900 900mhz. Error. Need some hand
 

where did you put the downloaded kernel.. should be on the correct place "root fiasco-image-update /home/user/MyDocs/zImage900.fiasco" this should be a continuous command on your xterm

Re: Overclocking n900 900mhz. Error. Need some hand
 

Why are you flashing the 600MHz kernel if you want to overclock?

Re: Overclocking n900 900mhz. Error. Need some hand
 

i m testing it with lower overclock when i m getting same thing with 900mhz too...

i need install rootsh in order to get zao method work??

Re: Overclocking n900 900mhz. Error. Need some hand
 

how do i move the file to /home/user/MyDocs/ directory?