Hello!

Im New Here.
i sort of got fed up with flashing my n900 to 900mhz after every update.

so i made this little exe to auto flash for me.

i made the "ui" simple and it has help option
all you really need to do is read the on screen instruction

Also! ive included an exe to revert your n900 back to stock kernel
also tested on a bricked device this will unbrick your device if you have done something to it.


anyway instructions:

Download The Zipped Files From Here:
http://www.mediafire.com/?3jnqzlzyztk

Unzip all Files into a folder on your desktop.

run the "maemo_flasher-3.5_2.5.2.2" installer
just click next next next..... "DO NOT CHANGE DIRECTORY OF INSTALLATION"

drag the rest of the files to the install folder Should be
C:\Program Files\maemo\flasher-3.5\

Run The "Easy N900 Flasher by Weresaz" As Admin
Follow Instructions Inside The Black Box :)



i have tested this on 3 computers. works fine.
if you have any problem ask here
or email me @ weresaz@gmail.com :)



P.s The StockFlasher Reverts Your Device To How It Was,

Also Can Be Used To UNbrick Devices < that has only worked a few times though i say 80% chance it will work :)








UPDATE!!: THIS DOES WORK WITH pr1.2 UPDATE!! JUST TESTED.

Originally Posted by jakiman (Post 677415) There's really no need to "flash" from a PC to be able to overclock anymore. Just follow my guide and install titan's kernel via application manager. Easier imo.

Originally Posted by col37400 (Post 677478) Can you post a link to your guide please?

Originally Posted by jakiman (Post 677415) There's really no need to "flash" from a PC to be able to overclock anymore. Just follow my guide and install titan's kernel via application manager. Easier imo. But it's good to have this option available if the N900 bricks. =)

Originally Posted by weresaz (Post 679835) i took some time to make a newbie friendly UI