Problem with the Flashing Software to reset MMC after 1.2 install
 

Dear Maemo Community,

I was positive surprised today that version 1.2 finally released, I tried to install it of course directly.

So I started the NSU on my XP Dell notebook and it couldn't find my phone at all (It worked fine before), equal what I tried nothing worked.

Right, so I tried the manual way as it is described in the news. Downloaded flasher 3.5 and used the command "flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin -f" which worked fine, then I used "lasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R" and the following stuff comes:

Windows can't install a device (Which is not even shown in the device manager) and it stucks there forever.

- Yes, I tested different drivers and uninstalled the old ones before
- I tested different modes on the phone without success
- I used the search function and didn't found a valid solution

I tested it also on my other notebook (ASUS G73) with WIn7 64bit and there it detect no phone at all (This was the point where I wanted to hit my phone with a big knife).

So is there a way to fix this problem or reset the eMMC manually somehow? I have a lot of mess installed and the phone is not really smooth at all, still 1.2 seems to be installed fine cause it shows "Version: 10.2010.19-1".

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

You must to flash emmc BEFORE PR 1.2 and don't restart beetwen.
Try flash RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin agian by Flasher-3.5.exe

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

I see, well look at http://thenokiablog.com/2010/05/25/h...900-maemo-1-2/

1. flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin -f

2. flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

So they wrote it wrong?

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

As always could you tell EXACT version of your OS (with service pack number)?
https://bugs.maemo.org/show_bug.cgi?id=4955

"...Notice that e;;C flashing works with Windows 7, Vista with SP2 and XP with SP3
(Windows XP with SP2 may NOT work in all PCs!!)..."

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

Try reflash ONLY RX-51_2009SE_10.2010.19-1.002_PR_COMBINED_002_ARM.bin. It help me in like case :)

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

No and No. Please read wiki and
http://tablets-dev.nokia.com/nokia_N900.php right column

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

Dell NB - WIndows XP SP3 (German)
Asus NB - Windows 7 64bit

Same issue on both devices, I can't reset the eMMC because it stucks at the device search. Now I have a software salad on my N900 which seems to be partially incompatible with 1.2 -.-

Only my Blondie desktop works still fine :(

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

Do you have other device besides keyboard and mouse installed in usb? Do you use usb-ports directly in your computer? Is pc-suite running when you are trying to flash emmc? (if so close it) Is AV-software running when you try to flash?

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

No, I use on both notebooks not even a mouse currently because I disconnected all optional devices.

i never used the PC suite because it always crashes directly on the XP machine.

I use AntiVir on the XP machine, I can try it again disabled but it never caused any issues yet.

I saw that there is a alternate way with a Linux boot CD, someone got that successful running yet?

Re: Problem with the Flashing Software to reset MMC after 1.2 install
 

Yes. Linux-livecd probably works, but it would be nice to solve this because there seems to be some people who have this problem.

.edit
Might be some weird glitch in windows usb drivers for some people but who knows?