help: flashing
 

Hi guys,

I have a problem now. I had installed the Kernel40 of titan.. and some how, after reboot i was stuck in a loop..
so i wanted to reflash my n900..after reflashing the phone takes 10 minutes to boot up :confused:??
after that i have no 2g/3g connection with my operator ??

what can i do ??

I tried to reflash it again.. but still dont have a 2g or 3g connection with my operator, and the bootup takes toooooo long.. there is something wrong but what ?

Re: help: flashing
 

Either remove titan's kernel or re-install it...

Seems like some kernel module trouble.

EDIT - What exactly did You flash? The kernel, the whole combined image and/or the eMMC image?

Re: help: flashing
 

hmm, but i allready reflashed the kernel ?
the troubles started after reflashing the device..

so i tried to reflash it again.. but it didnt helped

Re: help: flashing
 

I flashed the combined..

Re: help: flashing
 

If You didn't have problems before flashing then why did You flash. Just curious... :)

If You've got a backup (and You have moved it off the device or onto an external microsd), try flashing the combined image (without the -R option on the flasher command), and then flash the eMMC (with the -R option).

http://wiki.maemo.org/Flashing

Re: help: flashing
 

because i installed NITdroid.. :) and after that i wanted to OC my kernel to 850mhz.. and it was possible with titans kernel 40.. so i installed that..
after that i was stuck in a boot LOOP.. so i flashed the combined firmware and booted up my device, but it taked 10 minutes..

what is the meaning of -R ? is that to keep the settings in the device or something ?


"When flashing the eMMC content, always flash the FIASCO/Rootfs image and then flash the eMMC. Do not boot up the device between the two i.e do NOT use the -R parameter at the end! "

Re: help: flashing
 

-R = reboot ... :)

I'm sure You can find some info in the NITDroid threads about mixing titan's kernel and NITDroid:
http://talk.maemo.org/showthread.php?t=56524