N900 problem after hard rests....EMMC hard reset
 

hello guys.. i hard reset flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R to my N900, after hard reset when i boot my n900 its displays everything only in rectangle square box... how to change into normal view(English menu view)... help me

Re: N900 problem after hard rests....EMMC hard reset
 

Did you flash rootfs also?
http://wiki.maemo.org/Updating_the_tablet_firmware

Re: N900 problem after hard rests....EMMC hard reset
 

firstly.... i flashed flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f

secondly... i flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R

Re: N900 problem after hard rests....EMMC hard reset
 

i cant see anything on my n900... everything visible in square boxes only....

Re: N900 problem after hard rests....EMMC hard reset
 

Now go to the link posted and flash the phone the right way. Flashing two times the eMMC is wrong. Its normal to not boot properly in this scenario. First you flash the root without reboot then the eMMC.

!!!When flashing the eMMC content, always flash the FIASCO/Rootfs image and then flash the eMMC. Do not boot up the device between the two i.e do NOT use the -R parameter at the end!!!

Re: N900 problem after hard rests....EMMC hard reset
 

can u tell me what is FIASCO/Rootfs image and the eMMC...
what is the parameter for FIASCO/Rootfs image.,,, and parameter for eMMC can u give me parameter plz

Re: N900 problem after hard rests....EMMC hard reset
 

how to flash the fiasco/rootfs image FIRST.... parameter for FIASCO/Rootfs image

Re: N900 problem after hard rests....EMMC hard reset
 

http://wiki.maemo.org/Updating_the_tablet_firmware

go read.

Re: N900 problem after hard rests....EMMC hard reset
 

shanguy2002
What do you do not understand from here:
http://wiki.maemo.org/Updating_the_tablet_firmware

Re: N900 problem after hard rests....EMMC hard reset
 

hi guys,

i am sorry but I am having the same issue. I used the eMMC image for flashing the fiasco image first without rebooting and then flashed the eMMC with the same image. Now my phone comes with the square symbols. I cant see any other image for flashing the fiasco. Can you guys please help