Emmc not formatting
 

C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0004--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0004--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_GET_UPDATE_STATUS_REQ terminated with error code 1.

I despair, I tried all possibilities ... did not work anything
can someone help me?
anyone solved this problem?
Thank you!
and excuse me for my English

Re: Emmc not formatting
 

ok ..! I solved the problem,
you can close this thread!
Thank you!;)

Re: Emmc not formatting
 

How did you solved it? I have a similar problem I think.
http://talk.maemo.org/showthread.php...072#post812072

Re: Emmc not formatting
 

can u pls tell me how did u solve the su_get_update error on nokia n900? i have the same problem! cannot do nothing.. pls help is u know how to fix it?
thank you

Re: Emmc not formatting
 

i have the same problem, please help me.
i have a n900 pr 1.3, 20 days ago the flashing of the emmc was ok, but now its impossible: "SU_GET_UPDATE_STATUS_REQ terminated with error code 1."

Re: Emmc not formatting
 

i remember he solved it by this method. it helped me get rid of that error too

flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f

change kernel with
flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin' --flash-only=kernel -f

Restore emmc with vanilla
flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin' -f -R

Re: Emmc not formatting
 

I met the same problem please help me !

Re: Emmc not formatting
 

One post above yours - did that work for you?

Re: Emmc not formatting
 

I followed all the steps but "error code 3"