N900 Flashing eMMc Problem error code 3
 

Hi, Im having problems trying to flash the eMMc Im getting the next error

C:\Archivos de programa\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.201
0.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14

Version of 'sw-release': RX-51_2009SE_20.2010.36-2.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3.

Is there anything I can do?

Re: N900 Flashing eMMc Problem error code 3
 

I have the same problem here...

someone help us please :(

I flashed the FIASCO Image and the device booted up, but the emmc cannot be read .

and I tried to put an external memory card and it cannot be read too.

my device is not under warranty...

I gave it to a repair shop and they couldn't do anything.

Re: N900 Flashing eMMc Problem error code 3
 

make sure battery is charged (e.g use external charger), flash combined image, then emmc image and again combined. and use linux machine for flashing, not windows/mac.

Re: N900 Flashing eMMc Problem error code 3
 

see if you have apps partition, if so ,,install backmenu and partition fron gparted