USB-Connection: internal memory without partition
Hello,
yesterday I got my new n900 device and it is very great!
Today I connected it via USB to my laptop and detected an empty storage device, but with the phone everything works fine.
Do I have to create my own partition on the n900 to export it using usb? I read the manual twice times and I used google but I haven't found anybody with the some problem?!
What is my mistake?
Here are my logs:
Code:
root@ballrog: # dmesg
[348213.237116] usb 2-3: new high speed USB device using ehci_hcd and address 12
[348213.352185] usb 2-3: New USB device found, idVendor=0421, idProduct=01c7
[348213.352189] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[348213.352192] usb 2-3: Product: N900 (Storage Mode)
[348213.352195] usb 2-3: Manufacturer: Nokia
[348213.352197] usb 2-3: SerialNumber: XXXXXXXXXXX
[348213.353908] scsi11 : usb-storage 2-3:1.0
[348214.354989] scsi 11:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2
[348214.355479] scsi 11:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2
[348214.357036] sd 11:0:0:0: Attached scsi generic sg2 type 0
[348214.357248] sd 11:0:0:1: Attached scsi generic sg3 type 0
[348214.363687] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[348214.364317] sd 11:0:0:1: [sdc] Attached SCSI removable disk
[348218.900909] sd 11:0:0:0: [sdb] 56631296 512-byte logical blocks: (28.9 GB/27.0 GiB)
[348218.901246] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[348218.902634] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[348218.902640] sdb:
root@ballrog: #
Code:
root@ballrog: # fdisk -l /dev/sdb
Disk /dev/sdb: 29.0 GB, 28995223552 bytes
64 heads, 32 sectors/track, 27652 cylinders, total 56631296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
root@ballrog: #
|
