maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   General (https://talk.maemo.org/forumdisplay.php?f=7)
-   -   mod an 3310 into an desktop charger?? possible?? (https://talk.maemo.org/showthread.php?t=72666)

~phoenix~ 2011-04-30 20:42

mod an 3310 into an desktop charger?? possible??
 
can i use an old nokia 3310 to charge my 2 spare batteries for my n900??

3310 akku
li-ion
4 contacts +,-, 1 pin is to check if its an li-ion or ni-cd battery, bsi
3.6v
1000mAh

n900 akku
li-ion
3.7v
3 contacts +,-,bsi
1320mAh

~phoenix~ 2011-04-30 21:43

Re: mod an 3310 into an desktop charger?? possible??
 
edit:

i would say ....

+ to +
- to -
the battery type pin with 74.5kohm resistor to -
and the fourth one to bsi...

could that work that way??

Alfred 2011-04-30 22:10

Re: mod an 3310 into an desktop charger?? possible??
 
That'd be freakingggg awesome

esthreel 2011-04-30 22:32

Re: mod an 3310 into an desktop charger?? possible??
 
Isn't 3310 NI-MH?
http://www.amazon.co.uk/Nokia-3310-N.../dp/B0000CDU3D

dr_frost_dk 2011-04-30 22:38

Re: mod an 3310 into an desktop charger?? possible??
 
Quote:

Originally Posted by esthreel (Post 998028)

i don't know

but will say this, check if it is Ni-Mh or Li-ion/LiPo

if it is Li-ion/LiPo then yes you can, i have an old sony ericson i use to charge various Led lamps i have made over the years.

One thing to consider is that if the phone thinks the attached battery is an 'alien battery' like my SE says, then it will not charge with more then 100-250mA, this means that is will be SLOW.

Else if the nokia you have has the usual pins like the N900, then you can modify the nokia phone to kinda fit the BL-5J battery and use the nokia phone as a 'desktop' charger

~phoenix~ 2011-05-01 07:54

Re: mod an 3310 into an desktop charger?? possible??
 
when you connect an 75.5kOHM resistor between 2nd and 4th pin u can use an li-ion battery..... i have assembled it like sayd above... it seems to charge...^^

10:03 3.68v
10:15 3.72v
10:37 3.78v
11:07 3.82v
11:40 3.93v

which voltagedoes a full bl5j have``??

dr_frost_dk 2011-05-01 09:12

Re: mod an 3310 into an desktop charger?? possible??
 
between 4.15 - 4.23V will be a good place to start or end :D

~phoenix~ 2011-05-01 15:30

Re: mod an 3310 into an desktop charger?? possible??
 
ok it works ... but have some issues...

1. it charges only to 4.1 V what means about 90% charge
2. my first 3310 charged battery fell down from ybout 40% charge to 0% within a second..

but it works...

~phoenix~ 2011-05-02 20:45

Re: mod an 3310 into an desktop charger?? possible??
 
for everyone who want to know how to do it....

put the 3310 on tha table with charger connector faceing to you and display down ....

pins from left to right....

+5v , BC , BSI , -

solder between BC and - aresistor with 75,5 kOhm

connect + to + , - to - and bsi to bsi....

on the bl-5j bsi is the pin with an white circle and nothing in it...

when connected you should be able to powr on the 3310...

and i found out when i shut down the 3310 and let it charge about an hour longer after it said battery full it is at 97%

dr_frost_dk 2011-05-02 21:06

Re: mod an 3310 into an desktop charger?? possible??
 
remember if you are a bit crafty you can do this with all phones, all phones that use lithium battery's that is, but it has been a very long time since any phone has used NiMh battery's

One phone that comes to mind is the N95, it has the same 3 pins as the N900, you just need to mod the back so the BL-5J can fit in it, but again, any phone will do, no matter if it's Nokia, SE, Samsung etc....


All times are GMT. The time now is 04:20.

vBulletin® Version 3.8.8