N900 camera: operation failed
 

:(:(

Overclocking N900 to replace the battery after the start with a blank screen camera, maemo_flasher-3.5 rewrite EMMC and ROM
Turn on the camera,
Automatically shut down, suggesting that "operation failed"
How should I do??

Re: N900 camera: operation failed
 

Jeromeo
01-17-10 , 02:02 AM
Posts: 17 | Thanked: 5 times | Joined on Jan 2010 @ Fort Lauderdale, FL
Report This | #21
Kevven's suggestion works!

PROBLEM SOLVED!!!
Reason: Failed write error at some point when connected via USB and transferring files.
Solution: Run a checkdisk from your computer.

1. Connect your N900 via USB in MASS STORAGE MODE
2. Open My Computer (in Windows)
3. Right click on either the N900 drive icon or the MICROSD card icon (whichever save directory is causing camera error)
4. Click Properties
5. Click the Tools tab on the top
6. Click Check Now under Error-Checking
7. Make sure 'Automatically fix file system errors' is checked ('Scan for and attempt recovery of bad sectors' checkbox recommended, but not necessary)
8. Click Start
------------------------------------------------------------------------------------
Still can not activate the camera