maemo.org - Talk

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Community (https://talk.maemo.org/forumdisplay.php?f=16)
-   -   Memory Corrupt!! Help plz!! (https://talk.maemo.org/showthread.php?t=79638)

randull 2011-11-03 05:10

Memory Corrupt!! Help plz!!
 
Hi There,

I loved my phone :), but after an unexpected freeze I have to re-flash it.

The problem is when I try to run the command "flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f", I get this error:

SU_PREPARE_DATA_BLOCK_REQ terminated with error code 3

I found this when I did sfdisk -c /dev/mmcblk0 1 83

/dev/mmcblk0: unrecognized partition table type

sfdisk: 1: no such a partition.

I have tried so many things so I think that I problem get worst.

Please Help!!

I am Using windows, and I am not very familiar with linux :confused:

tuxsavvy 2011-11-03 05:34

Re: Memory Corrupt!! Help plz!!
 
Did you repartition you eMMC or change the filesystem layout? If so state which link you followed into changing the eMMC layout.

michaaa62 2011-11-03 11:58

Re: Memory Corrupt!! Help plz!!
 
Try to get some output first of
Code:

sfdisk -V
then from
Code:

sfdisk -l
The option of the second command is a small 'L'. You must invoke the commands as root!

randull 2011-11-04 15:23

Re: Memory Corrupt!! Help plz!!
 
Quote:

Originally Posted by michaaa62 (Post 1117745)
Try to get some output first of
Code:

sfdisk -V
then from
Code:

sfdisk -l
The option of the second command is a small 'L'. You must invoke the commands as root!

Results:

/home/user # sfdisk -V
read: Input/output error

sfdisk: read error on /dev/mmcblk0 - cannot read sector 0
/dev/mmcblk0: unrecognized partition table type

sfdisk: no partition table present.
/home/user # sfdisk -l

Disk /dev/mmcblk0: 977024 cylinders, 4 heads, 16 sectors/track
read: Input/output error

sfdisk: read error on /dev/mmcblk0 - cannot read sector 0
/dev/mmcblk0: unrecognized partition table type
No partitions found

Thank you very much for your help!! :)

randull 2011-11-04 15:24

Re: Memory Corrupt!! Help plz!!
 
Quote:

Originally Posted by tuxsavvy (Post 1117626)
Did you repartition you eMMC or change the filesystem layout? If so state which link you followed into changing the eMMC layout.

I have tried so many things that I couldnt remember what I did :(

Thanks!

tuxsavvy 2011-11-04 18:34

Re: Memory Corrupt!! Help plz!!
 
That looks like its seriously borked, the eMMC chip. I'd check:
Code:

dmesg
for any useful information as to why eMMC is now unreadable.

Otherwise paste the output of your dmesg here.

(edit) the output of a working eMMC with 32GB microSDHC inserted should look something like this:
Code:

Nokia-N900:~# sfdisk -l

Disk /dev/mmcblk1: 977120 cylinders, 4 heads, 16 sectors/track
Units = cylinders of 32768 bytes, blocks of 1024 bytes, counting from 0

  Device Boot Start    End  #cyls    #blocks  Id  System
/dev/mmcblk1p1          0+ 977119  977120-  31267832  43  Unknown
/dev/mmcblk1p2          0      -      0          0    0  Empty
/dev/mmcblk1p3          0      -      0          0    0  Empty
/dev/mmcblk1p4          0      -      0          0    0  Empty

Disk /dev/mmcblk0: 977024 cylinders, 4 heads, 16 sectors/track
Units = cylinders of 32768 bytes, blocks of 1024 bytes, counting from 0

  Device Boot Start    End  #cyls    #blocks  Id  System
/dev/mmcblk0p1          1  884864  884864  28315648  43  Unknown
/dev/mmcblk0p2    884865  950400  65536    2097152  83  Linux
/dev/mmcblk0p3    950401  974976  24576    786432  82  Linux swap / Solaris
/dev/mmcblk0p4          0      -      0          0    0  Empty
Nokia-N900:~#


michaaa62 2011-11-04 19:15

Re: Memory Corrupt!! Help plz!!
 
Please install recovery-tools package and run testdisk to get some useful (hopefully) output there.

Do you have a faint vision of how your emmc was partitioned, before you faced that error?

randull 2011-11-04 20:49

Re: Memory Corrupt!! Help plz!!
 
Quote:

Originally Posted by michaaa62 (Post 1118406)
Please install recovery-tools package and run testdisk to get some useful (hopefully) output there.

Do you have a faint vision of how your emmc was partitioned, before you faced that error?


Where do I can find the recovery-tools package?

I do not remember how it was partitioned, it was as it comes by default

Thanks!!

randull 2011-11-04 20:51

Re: Memory Corrupt!! Help plz!!
 
I have the rd mode activated, does it make difference??

randull 2011-11-04 21:06

Re: Memory Corrupt!! Help plz!!
 
Another question, how can I exports the results from the x-terminal to post them here?? Sorry I am kind of new in this :o


All times are GMT. The time now is 01:18.

vBulletin® Version 3.8.8