maemo.org - Talk - Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

maemo.org - Talk (https://talk.maemo.org/index.php)

- Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)

- - Urgent! reboot loop. After KP49 settings deinstallation need help Plz? (https://talk.maemo.org/showthread.php?t=80297)

Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

when ever i tried to reboot nokia logo appear and goes for reboot again.
i today upgraded my kernel power and updated it from HAM. i have kernel power 49 now .but later i think i should go back to my KP48 i felt older ver. was smooth. so i tried to uninstall it from HAM (my noobness) but it gave me erorr and showed probles that "kernel power sttings" is the problem. so i uninstall sttings from HAM.later i tried to uninstall KP 49 from HAM but it said "unable to install" so i tried Wiki and i open xterminal and type

Code:

sudo gainroot

apt-get install --reinstall -y kernel kernel-flasher

so it siad something like "could not lock var other prosess is using" (i dont remember properly)

i than think i should reboot my device and than try this with xterminal but it does not boot anymore.when ever i tried to reboot nokia logo appear and goes for reboot again

here than i searched and tried to reflash kernel using my pc(xp 32 bit) i opened keyboard insert usb holding "U"key and type in flasher

Code:

flasher-3.5 -f --flash-only=kernel -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

here flasher says "unknow argument specified"

plz help me

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

try with -k instead of --flash-only=kernel
if that does not work you have to extract zImage from .bin file using flasher and flash it

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

Quote:

Originally Posted by freemangordon (Post 1127792)

try with -k instead of --flash-only=kernel
if that does not work you have to extract zImage from .bin file using flasher and flash it

i tried

Code:

flasher-3.5 -f -k -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

and result is same
"unknow argument specified"

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

i am bumping this thread and will watch for any new reply for 1 Hour.otherwise i would go for a complete reflash. hope this community will solve my problem

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

How about:
flasher-3.5 -k -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

Quote:

Originally Posted by ammyt (Post 1127821)

How about:
flasher-3.5 -k -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

sorry i reflashed it :(

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

@nicholes,

For future reference: I think it's written just about everywhere that you should NEVER uninstall kernel-power using HAM. There's an extra icon in the app list for "Deinstall Kernel-Power", or something to that effect.

Reason is when you just remove kernel-power something (e.g. the standard kernel) has to replace the kernel that has been removed. The app takes care of that (presumably). HAM does not.

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

Quote:

Originally Posted by reinob (Post 1127867)

i first tried that but did not work for me and gave me error"unable to uninstall"(i dont remeber properly)

well since now i have flashed it and backed it up with inbuilt "backup" application everything(including kernel v49) was fine and today i again wanted to remove my kernel so i did this in my xterminal(according to Wiki) and (i have done this with kernel v48 successfully)

Code:

~ $ sudo gainroot

Root shell enabled





BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)

Enter 'help' for a list of built-in commands.



/home/user # apt-get install --reinstall -y kernel kernel-flasher

Reading package lists... Done

Building dependency tree

Reading state information... Done

0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 2 not upgraded.

1 not fully installed or removed.

Need to get 2046kB of archives.

After this operation, 0B of additional disk space will be used.

Get:1 https://downloads.maemo.nokia.com ./ kernel-flasher 2.6.28-20103103+0m5 [157kB]

Get:2 https://downloads.maemo.nokia.com ./ kernel 2.6.28-20103103+0m5 [1889kB]

Fetched 2046kB in 1min19s (25.9kB/s)

(Reading database ... 29923 files and directories currently installed.)

Preparing to replace kernel-flasher 2.6.28-20103103+0m5 (using .../kernel-flasher_2.6.28-20103103+0m5_armel.deb) ...

Unpacking replacement kernel-flasher ...

Preparing to replace kernel 2.6.28-20103103+0m5 (using .../kernel_2.6.28-20103103+0m5_armel.deb) ...

Unpacking replacement kernel ...

Setting up sdlquake-mmc1 (1.0.9-rev38) ...

/var/lib/dpkg/info/sdlquake-mmc1.postinst: line 3: maemo-select-menu-location: not found

dpkg: error processing sdlquake-mmc1 (--configure):

subprocess post-installation script returned error exit status 127

Setting up kernel (2.6.28-20103103+0m5) ...

Setting up kernel-flasher (2.6.28-20103103+0m5) ...

initctl: Job not changed: softupd

Version 0.4.4 started

Waiting for messages

flasher v2.8.2 (Jan 8 2010)



Image 'kernel', size 1705 kB

Version 2.6.28-20103103+0m5

Using flashing protocol Mk II.

ISI message from new source (10, 00)

Found device RX-51, hardware revision 2204

Entering update mode

Beginning image update

nand: Finishing % 1024 / 1705 kB 7347 kB/s]

nand: Flashing kernel image

Image flashed successfully in 1.276 s (1336 kB/s)!

Total flashing time 1.334 s

Leaving update mode

SIGTERM received

Errors were encountered while processing:

sdlquake-mmc1

E: Sub-process /usr/bin/dpkg returned an error code (1)

/home/user # apt-get remove -y kernel-power kernel-power-modules

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following packages will be REMOVED:

kernel-power kernel-power-flasher kernel-power-modules

0 upgraded, 0 newly installed, 3 to remove and 2 not upgraded.

1 not fully installed or removed.

After this operation, 10.8MB disk space will be freed.

(Reading database ... 29923 files and directories currently installed.)

Removing kernel-power-flasher ...

Removing kernel-power-modules ...

Removing kernel-power ...

Setting up sdlquake-mmc1 (1.0.9-rev38) ...

/var/lib/dpkg/info/sdlquake-mmc1.postinst: line 3: maemo-select-menu-location: not found

dpkg: error processing sdlquake-mmc1 (--configure):

subprocess post-installation script returned error exit status 127

Errors were encountered while processing:

sdlquake-mmc1

E: Sub-process /usr/bin/dpkg returned an error code (1)

/home/user # ls -l /lib/modules/current

lrwxrwxrwx 1 root root 12 Nov 24 18:01 /lib/modules/current -> 2.6.28-omap1

/home/user #

i think i should not reboot my phone now. there something wrong, can any guide me what do i do now?

can you plz confirm what kind of error is there in that code?

is there anything wrong i have done again?

i dont want to reflash again plz help

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

Quote:

Originally Posted by nicholes (Post 1127789)

here than i searched and tried to reflash kernel using my pc(xp 32 bit) i opened keyboard insert usb holding "U"key and type in flasher

Code:

flasher-3.5 -f --flash-only=kernel -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

here flasher says "unknow argument specified"

plz help me

you type it all wrong....it is not how you flash kernel only....

but it is how you need to type it....

Code:

flasher-3.5 -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin --flash-only=kernel -f -R

Re: Urgent! reboot loop. After KP49 settings deinstallation need help Plz?

Quote:

Originally Posted by pusak gaoq (Post 1128400)

you type it all wrong....it is not how you flash kernel only....

Code:

flasher-3.5 -f --flash-only=kernel -R -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin

but it is how you need to type it....

Code:

flasher-3.5 -F RX-51_2009SE_20.2010.36-2.004_PR_COMBINED_004_ARM.bin --flash-only=kernel -f -R

plz read my post#8

after that can i use your code? Will it or remove custom kernels?? Should i do this after those error which i posted n post#8