Aegis: cannot measure file orcexec (camera-ui)
 

Yesterday I've installed Camera Pro from Store , I tested it a bit then when I wanted to close I saw 3 windows on task manager that belonged to Camera Pro . After I closed them all , I was hearing that "click" of camera (the sound you hear when you close camera app) at random times , without any camera app open . I used dmesg to see if something went wrong and last 4-5 lines were about aegis cannot measure the file orcexec. (camera-ui) , so I reflashed my device but i'm still getting this error .

Now everything works fine , even camera , gallery and all , but I wanna make sure if there is something wrong .

This is only the part of log with aegis , if it's needed , I will post the full dmesg log . I hope it's not needed a Nokia Care vacation . :(


[ 1315.454101] Aegis: cannot measure file orcexec.vXNzeh (process: mpegaudiopars e0)
[ 1315.454315] Aegis: cannot measure file orcexec.GZxPio (process: mpegaudiopars e0)
[ 1315.454437] Aegis: cannot measure file orcexec.J9pylv (process: mpegaudiopars e0)
[31270.225646] Aegis: cannot measure file orcexec.AWgmad (process: mpegaudiopars e0)
[31270.225891] Aegis: cannot measure file orcexec.krdg8f (process: mpegaudiopars e0)
[31270.225982] Aegis: cannot measure file orcexec.S1Pa5i (process: mpegaudiopars e0)
[32329.706024] Aegis: cannot measure file orcexec.rruKXB (process: gallery)
[32329.707855] Aegis: cannot measure file orcexec.MK0wG3 (process: gallery)
[32329.708007] Aegis: cannot measure file orcexec.JPZufv (process: gallery)
RM696-40-4_PR_001:~#
RM696-40-4_PR_001:~# [ 1315.454101] Aegis: cannot measure file orcexec.vXNzeh (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [ 1315.454315] Aegis: cannot measure file orcexec.GZxPio (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [ 1315.454437] Aegis: cannot measure file orcexec.J9pylv (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [31270.225646] Aegis: cannot measure file orcexec.AWgmad (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [31270.225891] Aegis: cannot measure file orcexec.krdg8f (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [31270.225982] Aegis: cannot measure file orcexec.S1Pa5i (p
rocess: mpegaudioparse0)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [32329.706024] Aegis: cannot measure file orcexec.rruKXB (p
rocess: gallery)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [32329.707855] Aegis: cannot measure file orcexec.MK0wG3 (p
rocess: gallery)
-sh: syntax error: unexpected "("
RM696-40-4_PR_001:~# [32329.708007] Aegis: cannot measure file orcexec.JPZufv (p
rocess: gallery)
-sh: syntax error: unexpected "("

Re: So , we meet again ... AEGIS :(
 

Reflashed again , same . Please some mod move this thread on Harmattan/Meego section . Thanks .

Re: So , we meet again ... AEGIS :(
 

I'm using dmesg almost everyday to check if these aegis errors still appear , and yes , they do .

Please , someone take a look and tell me if it's something wrong . :confused:


[259970.014801] Aegis: cannot measure file orcexec.C49aJF (process: mpegaudioparse0)
[259970.015106] Aegis: cannot measure file orcexec.WEBOcb (process: mpegaudioparse0)
[259970.015197] Aegis: cannot measure file orcexec.ojXmFG (process: mpegaudioparse0)



[212809.327880] Aegis: cannot measure file orcexec.R2dcXb (process: gst-video-thumb)
[212809.328216] Aegis: cannot measure file orcexec.QwoYNc (process: gst-video-thumb)
[212809.328338] Aegis: cannot measure file orcexec.Rp7vDd (process: gst-video-thumb)



[211953.336456] Aegis: cannot measure file orcexec.cCsj5a (process: multiqueue0:src)
[211953.336761] Aegis: cannot measure file orcexec.uGSaRe (process: multiqueue0:src)
[211953.336883] Aegis: cannot measure file orcexec.UiGOBi (process: multiqueue0:src)
[211966.230041] Aegis: cannot measure file orcexec.U2Ckhf (process: gst-video-thumb)
[211966.230316] Aegis: cannot measure file orcexec.orytRk (process: gst-video-thumb)
[211966.230438] Aegis: cannot measure file orcexec.YQ6wqq (process: gst-video-thumb)
[212568.557342] Aegis: cannot measure file orcexec.eJpAQs (process: gallery)
[212568.557678] Aegis: cannot measure file orcexec.agoR6J (process: gallery)
[212568.557769] Aegis: cannot measure file orcexec.oA7Vl1 (process: gallery)
[212744.474182] Aegis: cannot measure file orcexec.UpSmwn (process: gallery)
[212744.474548] Aegis: cannot measure file orcexec.K4hgMA (process: gallery)
[212744.474700] Aegis: cannot measure file orcexec.m2e6YN (process: gallery)


[201999.131988] Aegis: cannot measure file orcexec.ISkyO8 (process: drive-qml)
[201999.132324] Aegis: cannot measure file orcexec.CKGql7 (process: drive-qml)
[201999.132415] Aegis: cannot measure file orcexec.EGWdR5 (process: drive-qml)

Re: So , we meet again ... AEGIS :(
 

Updated to PR1.2 and this error is still occouring everytime I start camera .

Re: Aegis: cannot measure file orcexec (camera-ui)
 

I've been getting these for some time too.

[ 149.781372] Aegis: cannot measure file orcexec.Pb8ewu (process: camera-ui)
[ 149.781646] Aegis: cannot measure file orcexec.KlU9PO (process: camera-ui)
[ 149.781768] Aegis: cannot measure file orcexec.NzAZ88 (process: camera-ui)
[ 229.842956] Aegis: cannot measure file orcexec.X8FPTy (process: gst-plugin-scan)
[ 229.848144] Aegis: cannot measure file orcexec.OvVIBX (process: gst-plugin-scan)
[ 229.848297] Aegis: cannot measure file orcexec.zNdWwm (process: gst-plugin-scan)

No change since PR 1.3 either.
On average camera-ui does seem to be logged more than others.
I too have Camera Pro installed from the main Store
I have now just uninstalled & performed a full power off, power on to see if this makes any difference.

Re: Aegis: cannot measure file orcexec (camera-ui)
 

anyone ever got a solution for this?