![]() |
[SOLVED] Mass Storage Mode not working on N9
Hi,
Whenever i try activating mass storage mode, i get the following error on my N9: "Can't connect to USB while your phone's memory is in use". I've tried re-booting but to no avail. I've checked the fastern9 and system-ui threads nobody there has any problems. till i installed these two there wasn't any issue. Is there any method to find out what is using the phone's memory that doesn't allow it to connect to USB. thanks in advance for your help. Edit: Sync and Connect as well as SDK mode flawlessly. Tried changing usb ports, usb cable, drive letter but to no avail. Edit 2: Solved thanks to mrsellout. i'd enabled logging for emails. disabling it solved the issue. |
Re: [HELP] Mass Storage Mode not working on N9
anybody with any idea pls?
|
Re: [HELP] Mass Storage Mode not working on N9
lsof will show you which files are being accessed, try running that to see what's open when you're trying to go into mass storage mode.
Code:
lsof > open_files Another alternative is to use sshfs to mount the drive from your linux box, and transfer files that way. |
Re: [HELP] Mass Storage Mode not working on N9
i've done that and got this: http://db.tt/MJf1ZDK4
however i don't see where any file that would affect the system is being used. could someone help me in figuring out what the output actually means. Edit: in windows currently when i go to computer, removable disk is present but greyed out. clicking it asks to insert a disk into Removable Disk. In Disk Management also it shows Drive E as No Media. |
Re: [HELP] Mass Storage Mode not working on N9
There's four log files being written inside MyDocs:
Code:
fenix 2726 user 5w REG 179,1 818483 239 /home/user/MyDocs/fenix.log |
Re: [HELP] Mass Storage Mode not working on N9
thanks alot mrsellout. i'd enabled logging for email a few days ago hence the trouble. sorry for troubling you and thanks for your help.
|
Re: [SOLVED][HELP] Mass Storage Mode not working on N9
Hey,
I just run into the same/similar problem and unfortunately it is not solved yet. Out of the blue I do get those error message (together with not enough power fromUSB to charge device, but afterwards it charges). And I cannot get a mass storage connection to the PC (2 types, different cables). I checked lsof, but nothing from MyDocs after reboot. The MyDocs gets unmounted, but keeps unmounted even after unplugging USB. Furthermore on the PC the number of drives enumerates up to 6 drives, but all are empty. After unpluging MyDocs keeps unmounted. I also played around withmodules g_nokia, g_ether, g_file_storage (resp. th different connection modes) in various orders. All to no avail. I really would appreciate any help. P.S.: I thought it was ubiboot (latest version just upgraded), but I went back to an older version where I definitely did nothave this behaviour. Still the same. Only difference I can now imagine/remember is that I have once/twice booted to FirefoxOS, but hey: Nothing to do with, or? |
Re: [SOLVED][HELP] Mass Storage Mode not working on N9
Quote:
If you made some tweaks there for FFOS that could be the problem.... (but I assume you have different preinit for FFOS, right?) So you also tried to export it manually, using g_storage? Then I think it is really strange since most of the problems of USB mount are caused by usbmoded getting unsynchronized. |
Re: [SOLVED] Mass Storage Mode not working on N9
@juice, may I thank/hug/kiss you (just virtually ;)))? !!!
Indeed I had played with usbmoded, but after tweaking did not test (thought I am super user, so no need :)) and forgot about. I had p2 and p3 also included :eek:, dumb me. Going to check with p1,p5,p6,p7 (will edit post later). Many many thanks. --edit Yep, indeed it is now working again as it should! :) I do have p1 as vfat and p5,p6,p7 as ext4 and do see them in Windoze and my VMs. :D |
All times are GMT. The time now is 21:43. |
vBulletin® Version 3.8.8