maemo.org - Talk - I can't flash EMMC image

maemo.org - Talk (https://talk.maemo.org/index.php)

- Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)

- - I can't flash EMMC image (https://talk.maemo.org/showthread.php?t=85079)

I can't flash EMMC image

Which is Strange because I flashed the FIASCO image without a problem and here the problem I get when I want to flash EMMC

Quote:

C:\Program Files\maemo\flasher-3.5>flasher-3.5 -F EMMC_By.MiDO.FaYad.8.giga.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_3.2010.02-8.003_PR_003
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Error claiming USB interface: No error

and end like that
there no Error Claiming USB so I don't know what is the problem

-My N900 is connected to USB 2.0 not from the front HUB
-I ran as administrator
-I can flash FIASCO without a problem but EMMC won't flash

please can anybody tell me what to do because I searched the forum and I can't find a solution for it

Re: I can't flash EMMC image

How did you flash the FIASCO image? did you use the -R flag?

can you post the exact list of things you did, and in whcih order?

Normally you flash first the eMMC image and THEN the FIASCO image.

Re: I can't flash EMMC image

Quote:

Originally Posted by supermedo (Post 1226631)

Which is Strange because I flashed the FIASCO image without a problem and here the problem I get when I want to flash EMMC

and end like that
there no Error Claiming USB so I don't know what is the problem

-My N900 is connected to USB 2.0 not from the front HUB
-I ran as administrator
-I can flash FIASCO without a problem but EMMC won't flash

please can anybody tell me what to do because I searched the forum and I can't find a solution for it

I also tried lot of times with all possible ways with windows xp and same problem. U did not mentioned the pc os.

Re: I can't flash EMMC image

Quote:

Originally Posted by SHARP66 (Post 1227082)

I also tried lot of times with all possible ways with windows xp and same problem. U did not mentioned the pc os.

try to download again emmc software and try agin,maybe your files has been corrupted???