maemo.org - Talk - [Q] Unable to use MicroSD Card after flashing

maemo.org - Talk (https://talk.maemo.org/index.php)

- General (https://talk.maemo.org/forumdisplay.php?f=7)

- - [Q] Unable to use MicroSD Card after flashing (https://talk.maemo.org/showthread.php?t=85389)

[Q] Unable to use MicroSD Card after flashing

I have just flashed my N900 with eMMC and them FIASCO aka COMBINED. I left Micro SD card in the phone while flashing.

I have done numerous re-starts but my phone doesn't see/mount external SD card which was working before flashing.

Phone's File Manger doesn't see the memory card.

On Windows 7 PC, I check the Micro SD Card with USB Card Reader and although it shows Device Detected etc but it is in accessible.

Is my card corrupted? What can I do to check it.
I also have a PC with Ubuntu 12.04 64-bit if it can be used to mount/test.

Please help me as I had all my data backed up on Micro SD card and without it I will lose all my data.

Kind Regards

Re: [Q] Unable to use MicroSD Card after flashing

What file system is it formatted with?
If it's formatted with a linux fs then Windows will not be able to access it.

Have you tried mounting it within Ubuntu?

Re: [Q] Unable to use MicroSD Card after flashing

Quote:

Originally Posted by jd4200 (Post 1235181)

What file system is it formatted with?
If it's formatted with a linux fs then Windows will not be able to access it.

Have you tried mounting it within Ubuntu?

I think it was/is formatted FAT32.

I have just connected it in Ubuntu and the memory card is not getting mounted.

EDIT:

Testing Micro SD Card in question nothing happens

Code:

khurram@HP:~$ fdisk -l

khurram@HP:~$

I tried this with another 32 GB Memory card I got this

Code:

khurram@HP:~$ fdisk -l



Disk /dev/sdc: 32.0 GB, 32018268160 bytes

170 heads, 53 sectors/track, 6940 cylinders, total 62535680 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000



   Device Boot      Start         End      Blocks   Id  System

/dev/sdc1            8192    62535679    31263744    c  W95 FAT32 (LBA)

Is there anything else to revive the card or atleast get the data out?