maemo.org - Talk
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   N9(Firmware) is dead, can anybody help me ? :( (https://talk.maemo.org/showthread.php?t=86316)

chico 2012-08-26 09:51
N9(Firmware) is dead, can anybody help me ? :(
 
My Nokia N9 16 GB is dead and cannot boot. It only start a error message it says : Your Device doesnt working ... Please try to restore the firmware with Nokia Software Updater or connect the Nokia service.. but i tried it with Software Updater and NaviFirm/Flasher but both things was failed, Software Updater cannot connect the phone and Navifirm/flasher cannot connect the phone too, it says FIASCO error :( I hope anybody can me explain how i can restore the N9.

Makeclick 2012-08-26 10:01
Re: N9(Firmware) is dead, can anybody help me ? :(
 
That sound very bad, but hope this or someone can help you and me :D
http://talk.maemo.org/showthread.php...ashing+problem

Makeclick 2012-08-26 10:04
Re: N9(Firmware) is dead, can anybody help me ? :(
 
I can not reflash my FIASCO too :O

Here is what my flasher says!

Code:
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 025.
Device identifier: 357923041261951 (SN: N/A)
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 22456 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 026.
Device identifier: 357923041261951 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 94 %, continuing.

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init        0 %      0 /      0 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress        transfer    flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init        0 %      1 /      1 kB      NA    ]
[ ] cmt-2nd      [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-algo    [pending      0 %      0 /      0 kB      NA    ]
[ ] cmt-mcusw    [pending      0 %      0 /      0 kB      NA    ]
[ ] xloader      [pending      0 %      0 /      0 kB      NA    ]
[ ] secondary    [pending      0 %      0 /      0 kB      NA    ]
[ ] kernel      [pending      0 %      0 /      0 kB      NA    ]
[ ] rootfs      [pending      0 %      0 /      0 kB      NA    ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1338189268)
[Pipe  0] Finishing in error state with status 10
WTF DFL61_HARMATTAN_40.2012.21-3_PR_001 How i get that?? i always used this image? We got some updates witch i do not remember????

chico 2012-08-26 10:15
Re: N9(Firmware) is dead, can anybody help me ? :(
 
thanks for the link. but the problem now is, my N9 can not battery charging. mybe because the firmware is incoorect ? i have try two other batteries and a lot of cables, but it is always the same problem. The N9 wont detected my cable, so i cant charge it. any idea ??

Makeclick 2012-08-26 10:18
Re: N9(Firmware) is dead, can anybody help me ? :(
 
wow :O there is 40.2012 :O http://www.btusers.com.ar/nan/nokia/...m=40.2012.21.3
That was news to me. So... downloading. it is not showing up in NaviFirmEX.. odd.

Makeclick 2012-08-26 10:26
Re: N9(Firmware) is dead, can anybody help me ? :(
 
Quote:
Originally Posted by chico (Post 1255825)
thanks for the link. but the problem now is, my N9 can not battery charging. mybe because the firmware is incoorect ? i have try two other batteries and a lot of cables, but it is always the same problem. The N9 wont detected my cable, so i cant charge it. any idea ??
wow.. hope your USB port is not broken from the N9. Try gentle push it different way, hope it will get connection. Hope you have warranty left and they are willing to fix it.. I hope this is something else..

Makeclick 2012-08-26 10:32
Re: N9(Firmware) is dead, can anybody help me ? :(
 
Maybe this will help you.. http://talk.maemo.org/showthread.php...sb+port+broken

But i think your phone is broken. If it says things like that..

madmike236 2012-08-26 10:35
Re: N9(Firmware) is dead, can anybody help me ? :(
 
Did you try flasher -c -F ImageName.bin -f -R?
Run the command then plug your device in while it is turned off.

chico 2012-08-26 10:49
Re: N9(Firmware) is dead, can anybody help me ? :(
 
Yes i try it but it says "no such file or directory" :(

madmike236 2012-08-26 11:04
Re: N9(Firmware) is dead, can anybody help me ? :(
 
What you can also try is to rename the image to someting like pr1.3.bin to make sure there is no typing error. Then cd to the directory containing the Image as root. then run the command or run the command with the fullpath to the Image eg:
~#: flasher -c -F /home/user/Desktop/pr1.3.bin -f -R


All times are GMT. The time now is 21:46.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8