![]() |
Light sensor died ! What can i do?
The light sensor or something died this afternoon, it isnt working and the screen is working with max bright,i have to push the button of wake /sleep(the button near the pen and headphone hole) every 10 seconds to wake the bright(when the i dont push the button the keyboard works well,but the screen gets black with max bright and i have to push the button again to see something)
it seems hardware error because before it dies the screen got crazy ilumination, any ideas? I dont want to push the button every 10sec because i love my n900 i use it well,is my n900 dying?is there somenthing that i can do? Thanks |
Re: Light sensor died ! What can i do?
First thing to try (if you haven't already done so):
Shut down and pull the battery for a couple minutes to eliminate the possibility of a temporary glitch/conflict with something. Next job could be a reflash, but try running a few checks in Healthcheck first. If it is a hardware fault it could just be a dodgy ribbon cable behind the screen. |
Re: Light sensor died ! What can i do?
I removed the battery for some time and the problem persists
when i run healthcheck on the part of testing the sensor, the program sunddenly closes itself other observation is that when i try to change the bright by control painel nothing happens, the screen and the light just stay normal when i touch continuosly the screen otherwise it gets black(it looks like a totally black screen only iluminated by these little lights of the corner of the screen,what i mean is that it isnt low light but lack of video ) and i have to push the button again to get the video restored every 10seconds what is REALLY BORING... Bad news my pc is on technical support,so i can only do the reflash in the next 2 weeks or so... can i do the repair myself? |
Re: Light sensor died ! What can i do?
I'm not sure if this is going to help, but you can try to disable MCE sensor:
Disable: Code:
sudo gainroot Enable: Code:
sudo gainroot |
Re: Light sensor died ! What can i do?
The phone just go to the lock screen
|
Re: Light sensor died ! What can i do?
the screen stay on when i connect in usb massive storage mode,it dont turn off unless i do so with the "lock button".
the sensitivity of brightness was totally lost. i think the problem is somewhat related to the light sensor and usb. because when i was accostumed to use the usb host mode function and close the app of usb H.e.n ,the display britness got zero ,and i had to go in the control panel to adjust the bright. have you all ever experienced something like that? any solution? |
All times are GMT. The time now is 19:08. |
vBulletin® Version 3.8.8