![]() |
Wifi connection to wpa2 ttls pap network
Hi everyone,
I'm new on this forum, just changed from my trusty android phone to a brand new jolla phone. I have a small question regarding wifi. Has anyone been able to connect to a wpa2 network with ttls and pap security? I can connect to my home wifi network without any issues but when I try to connect to the wifi network at work I immediately get the message "Sorry. Could not connect to the selected network.". Thanks. |
Re: Wifi connection to wpa2 ttls pap network
I also have this issue, trying to connect to wpa2 with ttls and mschapv2, using Sailfish on an N9, gives me the same message.
|
Re: Wifi connection to wpa2 ttls pap network
Same thing with the eduroam network at UEF. https://www.eduroam.org/
|
Re: Wifi connection to wpa2 ttls pap network
Quote:
|
Re: Wifi connection to wpa2 ttls pap network
Same for me with eduroam and also other local WLAN network at the university. There are no new log entries in wpa_supplicant.log when I try it. journalctl does not give much either. Only related entry could be this:
Code:
Dec 17 18:47:22 localhost alien_bridge_se[1339]: WifiModel::updateServiceList |
Re: Wifi connection to wpa2 ttls pap network
The installed packages include wpa_supplicant-2.0-1.2.1.armv7hl
The Freien Universität Berlin has a page on linux with eduroam. There's a sample eduroam-wireless.conf and instructions. I think I know how to edit the sample .conf for my own university but I don't know how to run wpa_supplicant so that it connects, stays connected through restarts or leaving and then returning to an area served by the network. And I don't know what effect this will have on the battery. Basically I feel like I have the jigsaw pieces but don't know how to put them together. |
Re: Wifi connection to wpa2 ttls pap network
wpa_supplicant is running anyway, it's what enables you to connect to WLAN at all.
I edited wpa_supplicant.conf and added this section: network={ ssid="eduroam" key_mgmt=WPA-EAP eap=PEAP identity="username@domain" ca_cert="/etc/pki/tls/certs/ca-bundle.crt" phase1="peaplabel=0" phase2="auth=MSCHAPV2" priority=2 } I haven't tested this in eduroam yet. Restarting wpa_supplicant didn't produce any new errors, and I was still able to connect to my existing WLAN (whew, because while fingerterm is good, nothing beats a full size keyboard and a large screen (or two) for serious admin work). I'll see what happens once I get back to UEF. Replace username@domain with your username and the domain of your university as per eduroam's instructions. |
Re: Wifi connection to wpa2 ttls pap network
Quote:
|
Re: Wifi connection to wpa2 ttls pap network
Quote:
|
Re: Wifi connection to wpa2 ttls pap network
have a look at this:
http://talk.maemo.org/showpost.php?p...postcount=2186 it worked for me & eduroam: a) activate devel-mode b) use the terminal on the device or ssh to the device c) install vim or any other text editor d) vim /var/lib/connman/wifi_eduroam.config Code:
[service_eduroam] |
All times are GMT. The time now is 23:57. |
vBulletin® Version 3.8.8