maemo.org - Talk - IPv6 DHCP not working correctly

Hi everybody,

I have a problem with connecting to a network which uses IPv6 Dhcp. The address in the connman config gets assigned correctly, but it does not come up on the interface:

Code:

IPv6.method=auto

IPv6.privacy=disabled

IPv6.DHCP.DUID=uidisset

IPv6.DHCP.LastAddress=ip:1::fffd

but on interface:

Code:

11: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 100

    link/ether <mac> brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.11/24 brd 192.168.0.255 scope global wlan0

    inet6 link-local4/64 scope link 

       valid_lft forever preferred_lft forever

Route is also pushed correctly and installed:

Code:

default via fe80::5054 dev wlan0 proto kernel metric 1024 expires 1373sec

I also see dhcpv6 requests with tcpdump but the ip address does not come up on the interface.

Does anybody know what leads to this behaviour?