maemo.org - Talk - SailfishOS 2.0 Nexus 5 CM12.1 Alpha1

maemo.org - Talk (https://talk.maemo.org/index.php)

- SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)

- - SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview (https://talk.maemo.org/showthread.php?t=96932)

SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

This requires a clean flash coming from cm11. Coming from the "SNAPSHOT" cm12.1 base also requires a clean flash if you would like sfdroid (for now). If a clean flash is too much work, wait for SFOS 2.0.2 to be released when cloud backup/restore is introduced to make it easier. Once on this base, OTAs are possible.

Until cm12.1 sfdroid becomes less buggy, more reliable, and more stable, this project will stay separate from the wiki and the cm11.0 base. Big thank you to BluesLee, sledges, mal-, kimmoli, monich, krnlyng, nh1402, Jolla, and any other contributors, testers, community members, or devs (in no particular order). Parts of this post have been taken from the wiki, and other parts from BluesLee's excellent thread.

Pros over cm11.0 base:

Better bluetooth functionality and performance.
Camcorder works.
Some video playback fixed.
Possibly lower sensor cpu usage without "ramp up" issue -- usage may vary.

Cons:

sfdroid (Android in a window) support is very early and unstable.
Laggy z-axis as a part of the sensorsfix3.zip. If you have issues, please post here or let me know on IRC.
OTA updates take hours to install due to a dbus bug. I recommend doing them overnight.

SFOS Installation:

If you're using multirom, ensure that you're running an older version of recovery that supports the "Flash Zip" capability for Sailfish. This build is recommended: http://d-h.st/BzdC
Depending on if you'd like to do a native install or use multirom, follow either native or multirom instructions on the wiki using the following CM12.1 and SFOS zips instead.
Flash sensorsfix3.zip on top of SFOS in recovery. If using the multirom method, go to Advanced=>Multirom => List Roms => <Sailfish ROM> => Flash Zip.
Reboot and setup your device.
There's no reason to OTA currently.

Test a very early preview of sfdroid:
Do not use this on a main rom unless you know how to revert. Additionally very little support will be given unless a logcat (devel-su /system/bin/logcat > blah) can be provided to debug the remaining crashes.
Known Sfdroid Bugs:

No audio
No gps, bluetooth, etc
The window and card (in task switcher) will be black on app switch. Tap or hold your finger on the screen when switching back to sfdroid to see android again.
Nexus 5 runs out of ram easily with sfdroid enabled and gapps. And when android crashes from OOM, it often re-optimizes apps. Testing enabling KSM and zram swap now.
Probably still some other crashes. Please post with a logcat (see above).
Google camera will not work. Additionally, SFOS camera will not work after using the AOSP camera until a reboot.
No AOSP keyboard swype support, install google keyboard from play store if desired.

Sfdroid Early Preview Installation:

Ensure you're running a cm12.1 base (cm-12.1-20160704-UNOFFICIAL-hammerhead.zip) SFOS installation.
Flash sfdroid on top of SFOS in recovery (multirom method should go to Advanced=>Multirom=>List Roms=><Sailfish ROM>=>Flash Zip).
Optional: Flash gapps. IMPORTANT: you must use our gapps package).
Add nemo to a required group (must have a password set in Settings => Developer Options):

Code:

devel-su usermod -G net_bt_stack -a nemo
Reboot

Disable Sfdroid:

Code:

curl -o http://sprunge.us/JPOI init.rc.bak

curl -o http://sprunge.us/JXPJ init.zygote32.rc.bak

devel-su

cp -f init.rc.bak /init.rc

cp -f init.zygote32.rc.bak /init.zygote32.rc

OTA Update Support:
DO NOT attempt an OTA to 2.0.2.X yet. If you want sfdroid support and are on an older base ("SNAPSHOT" cm12.1 build), you won't be able to get support from OTA'ing -- you must reflash using the new base.

Code:

RELEASE=<the version> # e.g. RELEASE=2.0.1.11

ssu release $RELEASE

devel-su sed -i -e 's#^adaptation=.*$#adaptation=http://repo.merproject.org/obs/home:/RealJohnGalt:/testing:/hammerhead/sailfish_latest_armv7hl/#' \

/usr/share/ssu/repos.ini

ssu dr mw

ssu ar mw http://repo.merproject.org/obs/nemo:/devel:/hw:/common/sailfish_latest_armv7hl/

ssu er mw

ssu lr

ssu lr

# ^ double-triple check that no -two- enabled repos point to the same URL



# You may have many of OpenRepos enabled. It's recommended to disable them, even

# though version --dup will do its best-effort to isolate repositories:

ssu lr | grep openrepos



devel-su zypper clean -a

devel-su zypper ref -f



version --dup

# if above fails, try again

version --dup



sync

reboot

Cool Stuff:
Change pixel_ratio to a smaller (but possibly better-fitting) ratio:

First enable the repository by entering root (with Developer Mode password):

Code:

devel-su ssu ar mer-tools ssu ur
To enable 1.82 pixel_ratio (opposed to 2.0 default):

Code:

curl http://sprunge.us/YbWB -o kimmoli-diyicons.sh chmod +x kimmoli-diyicons.sh devel-su ./kimmoli-diyicons.sh 1.82
To revert:

Code:

dconf reset /desktop/sailfish/silica/theme_pixel_ratio devel-su dconf update systemctl-user restart lipstick

MAC Address Randomization:
If you want to enable MAC address randomization each time the wlan interface is brought up, do the following:

Ensure you have a root password set. If unsure, go to Settings => Developer options, and save a password.
Either ssh or open terminal.
For temporary randomization until reboot or disable (toggle wlan afterward, reboot to disable):

Code:

devel-su sysctl -w net.core.randomize_mac=1
For permanent randomization (takes effect after the reboot):

Code:

devel-su echo "net.core.randomize_mac=1" > /etc/sysctl.d/macrand.conf reboot

Backup and restore
From your home directory on the Jolla phone do

Code:

tar cvf vault.tar .vault

and transfer the tar file to your Nexus 5 and restore it using the Jolla backup and restore from the settings app.

Install keyboard prediction as root

Code:

pkcon install jolla-xt9

Activate Low Power Mode (AKA "sneak peak" or "ambient display")

Code:

pkcon install mce-tools

mcetool --set-low-power-mode=enabled

Copy over maps package from Jolla Phone

Code:

pkcon download . sailfish-maps

FAQ:

Store is not working, or get an error about authentication when trying to install something in a shell.
Run (with developer settings password):

Code:

devel-su ssu dr adaptation0 pkcon refresh
Changed network mode in Settings, and now mobile data is intermittent or unreliable.
Run:

Code:

dbus-send --system --type=method_call --print-reply --dest=org.ofono /ril_0 org.ofono.RadioSettings.SetProperty string:TechnologyPreference variant:string:lte
APN settings not sticking after reboot.
This only needs to be run once (with developer settings password):

Code:

devel-su chown -R radio:radio /var/lib/ofono

Sources:
droid-config-hammerhead
droid-hal-version-hammerhead
droid-hal-hammerhead
android_kernel_lge_hammerhead
android_device_lge_hammerhead
Mer OBS Project

Donate to krnlyng (of sfdroid) https://www.paypal.com/cgi-bin/websc...=BDXQ6XV2ZXXUS
Donate to me (bitcoin): 1sfostM4Tbey3uP99Rvcx6edGTTRVF2U7

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

I may not have gotten round to getting your sources yet, but I will do at some point by the end of the week.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by RealJohnGalt (Post 1509185)

Test a very early preview of sfdroid:

Tried in MultiROM. Seems to get into a loop.
Waiting for service sensorservice ...

Code:

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

I/ServiceManager( 7012): Waiting for service sensorservice...

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

Tried with and without gapps.

See logcat file. Attachment 38461

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by abyzthomas (Post 1509208)

Tried in MultiROM. Seems to get into a loop.
Waiting for service sensorservice ...

Code:

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

I/ServiceManager( 7012): Waiting for service sensorservice...

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

E/qdhwcomposer( 1130): isValidDimension: layer handle is NULL

Tried with and without gapps.

See logcat file. Attachment 38461

My fault, thank you! I accidentally packaged the wrong folder (from a multiwindow branch). I just updated the link and also tweaked GC values for lower RAM devices. Seems to be running OOM less on my device from testing.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

I'm downloading for test and will report when I have anything to say. Thank you :)

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by RealJohnGalt (Post 1509210)

It is better and Android boots!!

I get AOSP keyboard stopped popup continuously. No keyboard!

Attachment 38462

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by abyzthomas (Post 1509238)

It is better and Android boots!!

I get AOSP keyboard stopped popup continuously. No keyboard!

Attachment 38462

If android boots before gapps has been flashed, a fresh install is required for now. I'm sorry, this is listed in bugs ("You must flash gapps immediately after flashing sfdroid without rebooting if you want gapps or you will run into android issues."), but I don't think I worded it properly.

I had the same issue without sfos and just using this cm12.1 and gapps, need to look into a proper fix still. On android, you'd wipe data and reflash gapps, but we can't do that. And regenerating the art cache doesn't fix it either.

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

I have a question, I've flashed everything as you wrote into the guide, gapps (mini) right after sfdroid zip, we'll, have I to see the gapps in the apps list?

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by RealJohnGalt (Post 1509247)

try deleting libjni_latinimegoogle.so

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by akira.pwr (Post 1509254)

I have a question, I've flashed everything as you wrote into the guide, gapps (mini) right after sfdroid zip, we'll, have I to see the gapps in the apps list?

i think you have to install the gapps right after the cm12.1 zip and the sfdroid at last, after the sailfish file.