advanced-systemui (0.5.8)

• fix: charging point on battery graph only resets when capacity increases more than 1% above previous capacity
• fix: bluetooth state is preserved when exiting flight mode
• fix: don't show long tap marker or drain rate in charging runlevel
• fix: power button key events are used instead of the HAL signal, long press will always work now
• fix: don't display negative battery drain values
• fix: blanking pause detection issue when blank and dim timeouts are identical
• fix: overall UI throttling didn't use the 60 second limit for tap throttling, it does now
• fix: restore autolock/stayslit settings on restart and blanking pause failure
• fix: memory/swap tap markers were at the wrong horizontal position
• fix: battery graph won't flip to landscape when opened from inverted landscape
• fix: display short tap marker instead of long tap marker in upper lock buttons when split
• changed 28% battery icon to all yellow
• cosmetic changes to asui-settings main menu
• an external shutdown (long press power button) now displays the "shutting down" dialog
• statusbar applet plays charging and battery low sounds
• setting to shutdown system when power button is long pressed and screen is locked
• setting to prevent power button from blanking screen when locked, instead unlocks or asks for secondary unlock key
• button to change system, keypad and touchscreen volumes
• setting to split lock buttons in two halves so both actions can be handled with short taps instead of short and long taps
• moved power button and device lock settings to their own pages
• power button double-tap support and actions for secure and normal mode
• lock and blank actions for the power button
• ASUI reads longpress and double-tap delays from /etc/mce/mce.ini
• MCE settings page to configure values in /etc/mce/mce.ini
• moved tap markers inside flight mode buttons
• changed screenshot long tap marker to an orange underline
• added circular border around screenshot delay buttons
• changed innerline color (dotted button borders) from #cccccc to #e3e3e3 for white theme
• changed secondary selection color (long tap markers) from #ee6100 to #ee8a00 for white theme
• moved long tap markers inside rotation button icons
• aligned rotation icons

Bold items are new since last test binary.

Those who haven't been installing test binaries will need to reconfigure their power button settings because the old keys have been renamed.

If you have problems with the screen not blanking try restarting alarmd and then restart mce. If that doesn't work, stop alarmd, restart mce and then start alarmd. Should fix the problem without a reboot.

Not sure why but the statusbar applet doesn't restart when upgrading so be sure to turn it off and back on again.