Thread: [Announce] kernel-power stable v49 in Extras-Testing
View Single Post
colin.stephane is offline colin.stephane
2011-09-03 , 10:21
Posts: 458 | Thanked: 783 times | Joined on Jan 2010 @ France
#1476
Originally Posted by Hurrian View Post
Got spontaneous reboots with this one, as opposed to freemangordon's kpcc.zip.
For me, the reboots you suffer, doesn't seem coming from the build I made ...

On my side, no reboot since I installed it :

Code:
-bash-2.05b$ uptime
 12:02:37 up  9:08,  0 users,  load average: 0.39, 0.64, 0.56
-bash-2.05b$
and this morning, I have used the camera to get a video of 20 minutes durring the 'visiting school day' of my child ...

On my side, I must say I do not use ramzswap, even if it was availaible inside my kernel modules builds, so maybe the problem come from here ...

Anyhow, here is my parameters :

Code:
-bash-2.05b$ kernel-config show
current kernel configuration:
current frequency: 805
supported frequencies: 125 250 500 550 600 700 750 805 850 900 950 1000 1100 1150 
min. frequency: 125
max. frequency: 805
avoid frequencies: 125 
active frequencies: 0:30,90 250:38,180 500:48,360 550:54,400 600:60,430 700:60,430 750:60,430 805:60,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520 
SmartReflex VDD1=1, VDD2=1
governor ondemand: ignore nice load= 0, up threshold= 70, sampling rate= 300000, powersave bias= 20
-bash-2.05b$
I'm waiting for more feedback from users, also parameters like 'SmartReflex VDD1=1, VDD2=1' tend to random reboot the device at differents maximum cpu speed, for diffeerents N900.

For example you can see my max cpu speed set to 805, my device can be overclocked higher only if I dont activate SmartReflex.

A++