Thread: [Announce] USB hostmode beta release
View Single Post
biketool is offline biketool
2011-09-13 , 11:27
Posts: 1,431 | Thanked: 2,630 times | Joined on Jan 2011 @ Touring
#865
So this is what I am getting now, I downgraded to Nokia kernel reboot and installed KP48 reboot, reinstalled HEN. I have two host cables and the flash drive works on my laptop. Previously H-E-N worked great, I use it quite a bit when cycling to upload pics form my camera SD card.
I am sure it is something simple but I don't know much about USB below the surface.
Code:
[  125.193084] usb usb1: usb resume
[  125.213806] hub 1-0:1.0: hub_resume
[  125.213867] hub 1-0:1.0: port 1: status 0101 change 0001
[  125.323211] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[  125.323272] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[  125.448242] usb 1-1: new high speed USB device using musb_hdrc and address 2
[  125.573242] usb 1-1: device descriptor read/64, error -71
[  125.807647] usb 1-1: device descriptor read/64, error -71
[  126.042114] usb 1-1: new high speed USB device using musb_hdrc and address 3
[  126.167541] usb 1-1: device descriptor read/64, error -71
[  126.401489] usb 1-1: device descriptor read/64, error -71
[  126.635803] usb 1-1: new high speed USB device using musb_hdrc and address 4
[  127.057739] usb 1-1: device not accepting address 4, error -71
[  127.182617] usb 1-1: new high speed USB device using musb_hdrc and address 5
[  127.604553] usb 1-1: device not accepting address 5, error -71
[  127.604705] hub 1-0:1.0: unable to enumerate USB device on port 1
[  127.604766] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[  127.604827] hub 1-0:1.0: port 1 enable change, status 00000501
[  130.224121] hub 1-0:1.0: hub_suspend
[  130.224212] usb usb1: bus auto-suspend
[  130.224243] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[  130.224304] usb usb1: bus suspend fail, err -16
[  130.224334] hub 1-0:1.0: hub_resume
[  130.225006] hub 1-0:1.0: port 1: status 0501 change 0000
[  130.225128] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[  130.225189] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[  130.346801] usb 1-1: new high speed USB device using musb_hdrc and address 6
[  130.471740] usb 1-1: device descriptor read/64, error -71
[  130.706115] usb 1-1: device descriptor read/64, error -71
[  130.940551] usb 1-1: new high speed USB device using musb_hdrc and address 7
[  131.065521] usb 1-1: device descriptor read/64, error -71
[  131.299896] usb 1-1: device descriptor read/64, error -71
[  131.534240] usb 1-1: new high speed USB device using musb_hdrc and address 8
[  131.956085] usb 1-1: device not accepting address 8, error -71
[  132.081329] usb 1-1: new high speed USB device using musb_hdrc and address 9
[  132.502960] usb 1-1: device not accepting address 9, error -71
[  132.503082] hub 1-0:1.0: unable to enumerate USB device on port 1
[  132.503143] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[  132.503204] hub 1-0:1.0: port 1 enable change, status 00000501
[  135.222015] hub 1-0:1.0: hub_suspend
[  135.222045] usb usb1: bus auto-suspend
[  135.222076] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[  135.222106] usb usb1: bus suspend fail, err -16
[  135.222106] hub 1-0:1.0: hub_resume
[  135.222167] hub 1-0:1.0: port 1: status 0501 change 0000
[  135.222229] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[  135.222259] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[  135.346740] usb 1-1: new high speed USB device using musb_hdrc and address 10
[  135.471740] usb 1-1: device descriptor read/64, error -71
[  135.706146] usb 1-1: device descriptor read/64, error -71
[  135.940429] usb 1-1: new high speed USB device using musb_hdrc and address 11
[  136.065429] usb 1-1: device descriptor read/64, error -71
[  136.300048] usb 1-1: device descriptor read/64, error -71
[  136.534301] usb 1-1: new high speed USB device using musb_hdrc and address 12
[  136.955963] usb 1-1: device not accepting address 12, error -71
[  137.081054] usb 1-1: new high speed USB device using musb_hdrc and address 13
[  137.502990] usb 1-1: device not accepting address 13, error -71
[  137.503143] hub 1-0:1.0: unable to enumerate USB device on port 1
[  137.503204] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[  137.503265] hub 1-0:1.0: port 1 enable change, status 00000501
[  140.221618] hub 1-0:1.0: hub_suspend
[  140.221679] usb usb1: bus auto-suspend
[  140.221679] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[  140.221710] usb usb1: bus suspend fail, err -16
[  140.221740] hub 1-0:1.0: hub_resume
[  140.221771] hub 1-0:1.0: port 1: status 0501 change 0000
[  140.221832] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[  140.221862] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[  140.346740] usb 1-1: new high speed USB device using musb_hdrc and address 14
[  140.471710] usb 1-1: device descriptor read/64, error -71
[  140.706024] usb 1-1: device descriptor read/64, error -71
 

The Following 2 Users Say Thank You to biketool For This Useful Post: