Thread: Flash eMMC VANILLA: raw data transfer failed
View Single Post
ffwill is offline ffwill
2011-09-29 , 17:15
Posts: 4 | Thanked: 0 times | Joined on Feb 2010
#1
Hello,

My N900 make stang stuff(reboot, sim card disconnection,...) since few days so I decide to flash it, the simple flash doesn't solve so I decide to make a vanilla flash. But it's failled.

I try on windows, it's failled:
Code:
    C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
    flasher v2.5.2 (Sep 24 2009)

    Image 'mmc', size 255947 kB
            Version RX-51_2009SE_10.2010.13-2.VANILLA
    USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
    105.
    Found device RX-51, hardware revision 2101
    NOLO version 1.4.13
    Version of 'sw-release': RX-51_2009SE_1.2009.42-11_PR_MR0
    Booting device into flash mode.
    Suitable USB device not found, waiting.
    USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x01c8.
    Raw data transfer EP found at EP2.
    Raw data transfer failed: m. 255947 kB  8192 kB/s]
And on Linux, but the programme is completly blocked at init step 20%
Code:
$ sudo flasher-3.5 -F ./Téléchargements/RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM\(2\).bin -f
    flasher v2.5.2 (Oct 21 2009)

    Image 'mmc', size 255947 kB
       Version RX-51_2009SE_10.2010.13-2.VANILLA
    USB device found found at bus 002, device address 013.
    Found device RX-51, hardware revision 2101
    NOLO version 1.4.14
    Version of 'sw-release': RX-51_2009SE_20.2010.36-2_PR_MR0
    Booting device into flash mode.
    Suitable USB device not found, waiting.
    USB device found found at bus 002, device address 014.
    Raw data transfer EP found at EP2.
    [init        20 %   32768 /  255947 kB     0 kB/s]
I retry many time, it bloked alwais at this point...
I download a new time the vanilla binary file... alwais the same result...

If you have any idea to help me
Thank you!