New Version 0.3 Uploaded: *Fixes miniature UI bugs *Fixes stability issues (ULV) *Requires you setting something Install the .deb, open it, then: Ready Made Profiles: choose ready-made profiles to use the built in profiles, i.e. Optimum, Blood Kain, Life Doubler, and their HD versions. Remember that HD versions bump up the performance a bit to comply with 720p playback/recording requirements. All battery patches will be installed. Configure Patches Lets you choose between the dynamic cpu patch, sigstop patch, and the vfs_cache_pressure patch. Note that choosing the dynamic cpu patch lets you load a profile you choose when unlocked, and a low power frequency + voltage profile when locked. Note: if you want to set of the in built profiles, i.e. (optimum, life doubler...) when unlocked, you will find them in: /usr/share/kernel-power-settings/ The best power-saving option I saw is by enabling all the patches with the HD-Life Doubler profile when unlocked. Build My Own WARNING: This is in beta status. It launches a wizard, where you set all the possible frequencies you will want to use, their voltages by a slider, and their dsp rate (up to 600MHz supported) and configures other KP aspects such as SR, up threshold, and sampling rate. Then it saves this profile as "userbuilt" in /usr/share/kernel-power-settings/userbuilt. You can use it later as the active profile with the dynamic cpu patch or anything else. To do: Add conguration of all other kernel power values (governor, ignore nice load...etc...)