Thread
:
u-boot for the RX-51 (N900)
View Single Post
Fabry
2011-10-13 , 05:26
Posts: 362 | Thanked: 426 times | Joined on Nov 2010 @ Italy, Lombardia
#
129
I made an attempt with the new kp48 image.
These are the problems found:
Power consumption problem is still present.
Initially it seems that p. consumption is normal (discharge rate on idle = 1-3% / hour) but after 1-2 hours of continuos idle the situation changes and becomes "discharge rate on idle greater than 10% / hour"
Lcd screen is always powered on.
Maemo never turns off it, it only shows a black screen (with backlight on, this is evident on a dark room)
There is problem with battery's charge measurement.
I had 50% of reported battery's charge and I have rebooted the phone.
After reboot reported battery's charge was only 7% and some mins after it was still 7%.
I doubted that a boot process can really consume over 40% of battery's charge, so I have flashed, by multiboot, a PR1.3 kernel (with no u-boot).
After reboot the reported battery's charge was 10% (greater than before) and some mins after it has raised to 39%
It seems that bootmenu appears even with closed keyboard
Quote & Reply
|
The Following 2 Users Say Thank You to Fabry For This Useful Post:
don_falcone
,
fw190
Fabry
View Public Profile
Send a private message to Fabry
Find all posts by Fabry